{"product_id":"lxe-thor-vm1-replacement-battery-108v-2600mah-li-ion","title":"LXE Thor VM1 Replacement Battery 10.8V 2600mAh Li-ion","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eLXE Thor VM1 \/ VM2 — 10.8V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 10.8V 2600mAh lithium-ion pack replaces the internal battery in the LXE Thor VM1 and Thor VM2 mobile data terminals. These are vehicle-mounted computers used in warehouses and distribution centres for scanning, data entry, and inventory tracking. It matches the original voltage and capacity specifications from the factory pack.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eThor VM1 and VM2 compatibility:\u003c\/strong\u003e\n    Both terminals run the same 10.8V battery rail and use the same connector housing and BMS handshake protocol, which is why a single pack covers both units without any modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through charge and discharge on a Thor VM1 unit, confirmed BMS communication with the terminal, and verified the pack passed the dock charging handshake without triggering a fault code.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-shift preparation on the VM1:\u003c\/strong\u003e\n    After installing the new pack, seat the terminal in its dock and let it complete a full charge cycle before pulling it into a pick-and-pack run. The scan trigger inrush current peaks when cells are near minimum, and starting from a full charge prevents false BMS trips at the start of your first shift.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCradle showing a charging error after fitting a new pack\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eA charging fault on the dock immediately after swapping packs almost always points to contact resistance between the terminal and the dock, not a faulty cell. Warehouse environments leave dust and debris on the battery contact pins, and even a thin layer raises resistance enough to trigger a fault. Wipe the contacts on both the pack and the dock with a dry cloth, then firmly reseat the terminal until you hear it click. The dock should begin reporting a charge state within 30 seconds of a clean reseat.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eTerminal losing wireless connection during a rapid scan burst\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe Thor VM1 draws current from two sources simultaneously during a scan burst: the imager or laser and the wireless radio polling the network. When the pack voltage sags under that combined load, the radio drops its connection before the imager fails. This typically appears as the terminal freezing mid-scan or dropping off the Wi-Fi network for a few seconds. If this happens on a new pack, confirm the cell is fully charged before the shift — voltage sag is steepest below 11.1V on a 10.8V Li-ion pack.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43324855058522,"sku":"BWCS-ICV410BL-1","price":40.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43324855091290,"sku":"BWCS-ICV410BL-2","price":47.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43324855124058,"sku":"BWCS-ICV410BL-3","price":52.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-ICV410BL-1.webp?v=1778123299","url":"https:\/\/batteryweb.com\/products\/lxe-thor-vm1-replacement-battery-108v-2600mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}