{"product_id":"lydsto-g2-replacement-battery-144v-5200mah-li-ion","title":"Lydsto G2 Cordless Vacuum Replacement Battery 14.4V 5200mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eLydsto G2 \/ HS1 \/ L1 \/ R1 Series — 14.4V Li-ion 5200mAh Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 14.4V lithium-ion battery rated at 5200mAh (74.88Wh) for the Lydsto G2 cordless vacuum and compatible models including the HS1, L1, and R1. It replaces the original pack when the cell capacity has degraded and the vacuum can no longer sustain cleaning performance across a full session. Dimensions are 136.60 × 37.60 × 37.30mm — verify these against your original pack before ordering.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eG2, HS1, L1, R1 platform fit:\u003c\/strong\u003e\n    These models share the same 14.4V battery architecture and physical connector format. The cell count and BMS voltage thresholds are matched across the range, which is why one pack covers all four variants.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack through charge and discharge cycles on vacuum-class loads. The BMS held cutoff correctly at the low-voltage threshold and did not trip under normal motor-start draw. Cell balance across the string stayed within spec after repeated cycles.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging habit on the Lydsto G2:\u003c\/strong\u003e\n    Do not leave the vacuum permanently seated on the charging dock. Continuous trickle current on a full cell accelerates capacity fade in lithium packs. Charge to full, then remove the vacuum from the dock until the next use.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping before the battery indicator reaches low\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens when the motor draws more current than rated — usually because the filter is partially blocked. Restricted airflow forces the motor to work harder, pulling higher current from the battery. The BMS reads that load as a voltage sag and reduces output to protect the cells, which presents as sudden suction loss even with charge remaining. Clean or replace the filter first, then retest with a fresh charge.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMotor cutting out mid-session then recovering after a short pause\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a BMS overcurrent trip, not a dead battery. When suction is restricted — blocked filter, clogged brush roll, or sealed nozzle — current spikes above the BMS cutoff threshold and the pack disconnects the motor. After a brief cool-down the BMS resets and power returns. Clear the blockage completely and confirm the pack voltage reads at least 16V off the charger before ruling out a cell issue.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43427995975770,"sku":"BWCS-PCM710VX-1","price":70.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43427996008538,"sku":"BWCS-PCM710VX-2","price":83.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43427996041306,"sku":"BWCS-PCM710VX-3","price":92.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-PCM710VX-1.webp?v=1779933755","url":"https:\/\/batteryweb.com\/products\/lydsto-g2-replacement-battery-144v-5200mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}