{"product_id":"ma-com-ericsson-bz1032-replacement-battery-72v-2000mah-ni-mh","title":"Ma-Com-Ericsson BZ1032 Replacement Battery 7.2V 2000mAh Ni-MH","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eMa-Com-Ericsson BZ1032 — 7.2V Ni-MH Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 7.2V, 2000mAh Ni-MH replacement battery for the Ma-Com-Ericsson BZ1032 two-way radio. It slots into the same battery bay and uses the same contact arrangement as the original pack. Capacity figures come from the product data — 2000mAh, 14.4Wh.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBZ1032 platform fit:\u003c\/strong\u003e\n    The BZ1032 runs a 7.2V Ni-MH chemistry at this capacity tier. Swapping to a different voltage or chemistry risks BMS handshake rejection or incorrect charge termination in the dock.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through full charge and transmit-load discharge on the BZ1032 platform. The BMS handled PTT-triggered current spikes without tripping into overcurrent lockout across repeated cycles.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst insertion into the dock:\u003c\/strong\u003e\n    If the dock shows a fault LED on first seating, remove the pack, wipe the gold contact strip with a dry cloth, and reseat firmly. The BZ1032 charger requires a clean contact cycle to register the new pack and begin charge acceptance.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBZ1032 transmit cutout on a freshly inserted pack\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNi-MH cells ship at storage voltage — typically 1.0–1.1V per cell, which puts a six-cell 7.2V pack around 6.2–6.6V. The BZ1032 transmit circuit draws a sharp current spike the moment PTT is pressed. If the pack hasn't completed at least one full charge cycle, that spike can pull cell voltage below the BMS low-voltage cutoff threshold, killing the transmission mid-press. Run a full charge before the first field use — not a partial top-up.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBar indicator reads one bar fewer than expected after a full charge\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe BZ1032 uses a simple voltage-threshold bar display — each bar corresponds to a voltage bracket, not a fuel-gauge calculation. A new Ni-MH pack fresh off the charger may read one bar low because cell voltage hasn't yet stabilised after charge termination. Rest the pack in the radio for 10–15 minutes post-charge before checking the indicator. After the first complete charge-discharge cycle, the resting voltage settles and the indicator reads correctly.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43426292007002,"sku":"BWCS-TAZ100TW-1","price":45.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43426292039770,"sku":"BWCS-TAZ100TW-2","price":53.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43426292072538,"sku":"BWCS-TAZ100TW-3","price":58.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-TAZ100TW-1.webp?v=1779930602","url":"https:\/\/batteryweb.com\/products\/ma-com-ericsson-bz1032-replacement-battery-72v-2000mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}