{"product_id":"mafell-kss-40-18m-bl-pure-im-t-max-replacement-battery-18v-2000mah-li-ion","title":"Mafell KSS 40 18V Cordless Saw Replacement Battery 2000mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eMafell KSS 40 18M bl PURE im T-MAX — 18V Li-ion 2000mAh Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is an 18V 2000mAh Li-ion battery for the Mafell KSS 40 18M bl PURE im T-MAX cordless circular saw and compatible 18V Mafell platforms including the ROMAX 4000, KSS 50 18M bl PURE im Transportkoffer, and ROMAX Axial series. It delivers 36Wh of stored energy through the same connector and BMS handshake as the original pack. Voltage and capacity match the factory specification exactly.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eKSS and ROMAX platform compatibility:\u003c\/strong\u003e\n    Mafell's 18V cordless line shares a common battery rail, connector pinout, and BMS communication protocol across the KSS saw and ROMAX press-fit families. The same cell configuration and data line allow one pack to cross models without any adapter or firmware conflict.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack through repeated cold-start trigger pulls on the KSS 40 platform and monitored the BMS response to motor-start inrush current. The overcurrent threshold held on each start cycle, and the protection circuit reset cleanly between draws.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eMotor inrush break-in on first use:\u003c\/strong\u003e\n    On first use, run the saw at half-depth cuts for two full discharge-charge cycles before pushing maximum blade depth. This lets the BMS log the actual inrush current profile of your specific motor and set overcurrent trip thresholds to match — reducing nuisance cutouts during hard starts.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBMS cutoff on KSS 40 motor-start inrush surge\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe KSS 40 blade motor draws a spike of current in the first 50–100ms of each trigger pull — often 3–5× the steady running draw. A new pack with a conservatively set BMS can interpret this spike as a fault and cut the output rail before the blade reaches speed. This is not a defective battery. The BMS recalibrates its trip threshold after it has logged several real-load start cycles. Running two break-in cycles at reduced depth normalises the threshold to the motor's actual inrush signature.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSaw bogs under load mid-cut despite a full charge indicator\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eIf the KSS 40 loses blade speed partway through a cut while the charge indicator still shows full, the issue is usually voltage sag — not remaining capacity. High contact resistance at the battery rail, a worn blade demanding more current, or sustained cuts in dense hardwood all pull the cell voltage below the BMS's low-voltage floor. The pack cuts output to protect the cells even though nominal charge remains. Clean the battery contacts with isopropyl alcohol, seat the pack firmly until it clicks, and confirm rail voltage reads above 16.5V under load before suspecting a cell fault.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43416016420954,"sku":"BWCS-MTB180VX-1","price":79.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43416016453722,"sku":"BWCS-MTB180VX-2","price":92.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43416016486490,"sku":"BWCS-MTB180VX-3","price":102.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-MTB180VX-1.webp?v=1779759486","url":"https:\/\/batteryweb.com\/products\/mafell-kss-40-18m-bl-pure-im-t-max-replacement-battery-18v-2000mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}