{"product_id":"mafell-kss-40-18m-bl-pure-im-t-max-replacement-battery-18v-3000mah-li-ion","title":"Mafell KSS 40 18V 3000mAh Li-ion Compatible Battery","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eMafell KSS 40 18M bl PURE \/ ROMAX 4000 Series — 18V Li-ion 3000mAh Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is an 18V, 3000mAh (54Wh) Li-ion replacement battery for the Mafell KSS 40 18M bl PURE im T-MAX compact circular saw and the broader ROMAX series. It fits the KSS 50 18M bl PURE im Transportkoffer, ROMAX Axial, and 21 additional Mafell 18V platforms sharing the same battery interface. Voltage and connector match the OEM pack directly.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eKSS and ROMAX platform compatibility:\u003c\/strong\u003e\n    These models share a common 18V battery rail, connector latch geometry, and BMS communication protocol — which is why one pack spans the full lineup. The cell count and discharge curve stay consistent across the KSS and ROMAX families, so the BMS handshake completes without tool-side firmware rejection.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack through motor-start inrush cycles on circular saw loads. The BMS held stable through repeated trigger pulls without tripping overcurrent cutoff. Cell voltage balance across the pack stayed within 30mV after sustained discharge.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eMotor inrush conditioning on first use:\u003c\/strong\u003e\n    On first use, run the KSS 40 at half load — shallow crosscuts, no full-depth plunge — for two cycles before maximum load applications. This allows the BMS to register the motor's inrush current signature and set overcurrent thresholds accordingly before you push the saw to full depth in hardwood.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBMS cutoff on KSS 40 motor-start inrush surge\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe KSS 40 blade motor draws a spike of current in the first 50–100ms of each trigger pull — this is normal inrush behaviour for a brushless motor under load. If the BMS has not yet profiled the motor's draw, or if the pack has been in storage, it may interpret that spike as a fault and cut output. A fresh pack coming off a full charge cycle is less likely to trip because cell impedance is at its lowest point. If cutout happens on trigger pull, fully charge the pack and run two light-load cycles before attempting full-depth cuts.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCharger not recognising the pack after storage\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLi-ion cells that have sat uncharged for several months can drop below the charger's acceptance voltage threshold — typically around 2.5V per cell. When this happens, the Mafell charger blinks an error rather than beginning a charge cycle. The fix is to check whether any other 18V Mafell-compatible charger on a recovery or boost mode can nudge the pack above the acceptance threshold. Once cells read above roughly 2.8V per cell, the charger should recognise the pack and begin normal CC\/CV charging.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43416052170842,"sku":"BWCS-MTK570PW-1","price":62.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43416052203610,"sku":"BWCS-MTK570PW-2","price":72.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43416052236378,"sku":"BWCS-MTK570PW-3","price":80.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-MTK570PW-1.webp?v=1779759859","url":"https:\/\/batteryweb.com\/products\/mafell-kss-40-18m-bl-pure-im-t-max-replacement-battery-18v-3000mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}