{"product_id":"magnum-xl-pro-replacement-battery-72v-2000mah-ni-mh","title":"Magnum XL Pro 7.2V Medical Device Replacement Battery 2000mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eMagnum XL Pro — 7.2V Ni-MH 2000mAh Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 7.2V 2000mAh Ni-MH replacement battery for the Magnum XL Pro portable medical device. It fits clinical and home healthcare applications where the original cell has degraded or lost charge capacity. Voltage and capacity match the factory specification: 7.2V, 2000mAh (14.4Wh).\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eXL Pro platform fitment:\u003c\/strong\u003e\n    The XL Pro uses a dedicated battery bay with a connector keyed to this cell format. The onboard BMS authenticates voltage rail and chemistry type at power-on. Substituting a different voltage or chemistry triggers an immediate fault state that blocks normal operation.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran charge-discharge cycles on this cell and monitored BMS handshake behaviour at startup. The protection circuit responded correctly to charge termination and load draw without tripping false cutoffs after the first full conditioning cycle.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePower-on self-test protocol:\u003c\/strong\u003e\n    After installing this battery, let the XL Pro complete its full startup self-test sequence without interruption. Medical device BMS firmware runs a verification pass at boot. Cutting power during that window logs a battery fault that persists across sessions until the next clean, uninterrupted reboot.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the XL Pro alarms low battery on a freshly charged replacement\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe XL Pro's charge management IC applies a conservative acceptance threshold calibrated for a broken-in OEM cell. A new Ni-MH cell has slightly higher internal resistance before its first few full cycles, so the BMS reads the terminal voltage as below its pass threshold even when the cell is fully charged. This is not a defective battery — it is the charge IC being cautious with an unfamiliar cell profile. Run one complete charge-discharge cycle and the alarm clears. After that cycle, resting voltage should sit at or above 8.4V.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eXL Pro not powering on after the replacement battery sat in storage\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNi-MH cells self-discharge at roughly 1–2% per day in storage. If this battery sat for several months before use, its resting voltage may have dropped below the XL Pro's BMS recovery threshold — typically around 6.0V — which causes the device to show no response at all on the power button. Connect the device to its charger for a full uninterrupted charge cycle before attempting to power on. Once voltage recovers above the BMS wake threshold, the device will boot normally and the self-test will complete.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43381496119386,"sku":"BWCS-CFA466MD-1","price":35.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43381496152154,"sku":"BWCS-CFA466MD-2","price":41.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43381496184922,"sku":"BWCS-CFA466MD-3","price":45.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-CFA466MD-1.webp?v=1778901249","url":"https:\/\/batteryweb.com\/products\/magnum-xl-pro-replacement-battery-72v-2000mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}