{"product_id":"mangar-airflo-12-replacement-battery-12v-2000mah-ni-mh","title":"Mangar Airflo 12 CD0313 Replacement Battery 12V 2000mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eMangar Airflo 12 — 12V Ni-MH Replacement Battery (CD0313)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 12V, 2000mAh Ni-MH battery replaces the original power cell in the Mangar Airflo 12 portable air pump. The Airflo 12 is a medical-grade pneumatic device used for pressure relief and mobility assistance. OEM part number CD0313 confirms fitment before ordering.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eAirflo 12 fitment:\u003c\/strong\u003e\n    The Airflo 12 runs a 12V motor rail with a BMS that handshakes on cell chemistry and voltage profile. Ni-MH is the correct chemistry for this platform — substituting Li-ion will not satisfy the BMS handshake and will cause a persistent fault state.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through the Airflo 12's startup self-test and pump load sequence. The BMS accepted the cell on the first power-on, held voltage above the low-battery threshold under motor load, and passed the self-test without triggering a fault flag.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-use power-on sequence:\u003c\/strong\u003e\n    After installing this battery, allow the Airflo 12 to complete its full power-on self-test without interruption. Medical-grade BMS firmware runs a verification pass at startup — cutting power mid-sequence logs a false battery fault that persists until the next clean reboot from full charge.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the Airflo 12 alarms low battery on a freshly charged replacement\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe Airflo 12's charge IC applies a conservative upper voltage limit when it detects a cell it hasn't profiled before. A new Ni-MH cell fresh from storage reads a slightly different internal resistance than a conditioned OEM cell, and the BMS interprets this as a partially charged or degraded pack. This triggers the low-battery alarm even when the cell is at full state of charge. One complete charge-discharge cycle through the device recalibrates the BMS threshold and clears the alarm permanently.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eAirflo 12 not powering on after replacement cell sat in storage\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNi-MH cells self-discharge during storage at roughly 1–2% per day, and the Airflo 12's BMS has a minimum recovery voltage below which it will not attempt to power the pump. If the replacement cell has been sitting, it may have dropped below this threshold — typically around 10.5V for a 12V Ni-MH pack. Connect the device to the charger for at least 30 minutes before attempting to power on. This allows the charge IC to push the cell above the BMS recovery floor and re-enable the start sequence.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43381415870554,"sku":"BWCS-MGA313MD-1","price":50.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43381415903322,"sku":"BWCS-MGA313MD-2","price":59.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43381415936090,"sku":"BWCS-MGA313MD-3","price":66.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-MGA313MD-1.webp?v=1778900625","url":"https:\/\/batteryweb.com\/products\/mangar-airflo-12-replacement-battery-12v-2000mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}