{"product_id":"medion-md9014-replacement-battery-74v-1850mah-li-ion","title":"SB-L160 Medion MD9014 Compatible Battery 7.4V 1850mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eMedion MD9014 — 7.4V Li-ion Replacement Battery (SB-L160)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 7.4V, 1850mAh Li-ion battery for the Medion MD9014 digital camera. It replaces the OEM SB-L160 cell when the original no longer holds enough charge to complete a shoot. Dimensions are 70.60 × 38.20 × 20.60mm — confirm your existing cell matches before ordering.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMD9014 and MD-9014 compatibility:\u003c\/strong\u003e\n    Both model strings refer to the same Medion camera body. They share the same battery bay, connector orientation, and voltage rail, so one cell covers both.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through charge and discharge on the bench. The BMS accepted the cell without error and voltage held steady across the discharge curve until the low-voltage cutoff tripped cleanly.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-install charge cycle:\u003c\/strong\u003e\n    Run the first full charge inside the OEM Medion charger or directly in the camera body. Some camera BMS firmware requires a charge cycle from within the system before the battery-remaining indicator maps correctly to the new cell's discharge curve.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBattery percentage jumping erratically on the MD9014 display\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe MD9014 maps its battery indicator to voltage thresholds calibrated for a specific discharge curve. A new Li-ion cell discharges slightly differently from a worn OEM cell, so the percentage can jump — dropping from 80% to 40% in a few shots, then stabilising. This is a BMS threshold mismatch, not a cell fault. Complete two full charge-discharge cycles and the indicator will settle as the camera recalibrates its threshold mapping to the replacement cell's actual curve.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMD9014 showing dead-battery indicator on a partially charged replacement cell\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eOn first install, the camera sometimes reads a new cell as flat even when it shipped with a partial charge. The BMS has not yet authenticated the cell's starting voltage reference point. Place the battery in the OEM charger and run it to a full charge before inserting it into the body. Once the charger confirms a full cycle, the camera will accept the cell and display a normal charge level — typically reading 7.4V at full charge.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43333852495962,"sku":"BWCS-SBL160-1","price":29.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43333852528730,"sku":"BWCS-SBL160-2","price":33.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43333852561498,"sku":"BWCS-SBL160-3","price":36.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-SBL160-1.webp?v=1778213402","url":"https:\/\/batteryweb.com\/products\/medion-md9014-replacement-battery-74v-1850mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}