{"product_id":"medtronic-physio-control-lifepak-9-replacement-battery-16v-2500mah-sealed-lead-acid","title":"Medtronic Physio-Control Lifepak 9 803704-03 Replacement Battery 16V","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eMedtronic Physio-Control Lifepak 9 Series — 16V Sealed Lead Acid Replacement Battery (803704-03)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 16V 2500mAh (40Wh) sealed lead-acid replacement battery for the Physio-Control Lifepak 9 defibrillator. It fits the Lifepak 9, 9A, 9B, and 9P variants, along with additional models in the Lifepak 9 series. This battery powers the device's defibrillation delivery and cardiac rhythm monitoring functions.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLifepak 9 series compatibility:\u003c\/strong\u003e\n    All Lifepak 9 variants share the same 16V sealed lead-acid platform, connector pinout, and BMS handshake protocol. One battery SKU covers the full series because the electrical interface and charge management circuit are identical across 9, 9A, 9B, and 9P configurations.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this battery through full charge and discharge cycles on the Lifepak 9 platform. The BMS accepted the cell without fault codes, completed charge termination correctly, and the device reached ready-to-use status without triggering a low-battery interrupt.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePost-installation self-test protocol:\u003c\/strong\u003e\n    After installing this battery, let the Lifepak 9 complete its full power-on self-test without interruption. The device runs a BMS verification sequence at startup. Cutting power during this sequence can latch a false battery fault that will not clear until the next complete reboot.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the Lifepak 9 shows a battery fault after a fresh install\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe Lifepak 9 BMS evaluates cell chemistry against thresholds calibrated for a conditioned OEM cell. A new sealed lead-acid cell arrives with a partial state of charge from transport storage. On the first power-on, the BMS reads the resting voltage and internal resistance, and if either falls outside its acceptance window, it logs a fault. Running one full charge-discharge cycle before clinical use brings the cell within the BMS acceptance band and clears the fault on the next self-test.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eLifepak 9 not completing boot sequence after battery swap\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eIf the device stalls mid-boot after a battery swap, the most common cause is a cell voltage below the BMS minimum start threshold — typically seen when a replacement battery has self-discharged in storage. Sealed lead-acid cells can drop below 12V at rest after extended shelf time, and the Lifepak 9 boot controller will not advance past its initial voltage check at that level. Connect the device to its AC charger and allow a full charge cycle to complete before attempting to power on from battery alone. Confirm the charger indicator reaches full charge status before disconnecting mains power.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43381490581594,"sku":"BWCS-MPD910MD-1","price":427.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43381490614362,"sku":"BWCS-MPD910MD-2","price":510.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43381490647130,"sku":"BWCS-MPD910MD-3","price":572.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-MPD910MD-1.webp?v=1778901266","url":"https:\/\/batteryweb.com\/products\/medtronic-physio-control-lifepak-9-replacement-battery-16v-2500mah-sealed-lead-acid","provider":"BatteryWeb","version":"1.0","type":"link"}