{"product_id":"medtronic-scd700-replacement-battery-108v-2600mah-li-ion","title":"Medtronic SCD700 Compatible Battery 10.8V 2600mAh Li-ion","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eMedtronic SCD700 — 10.8V Li-ion Replacement Battery (1030950)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 10.8V Li-ion battery replaces OEM part 1030950 in the Medtronic SCD700 implantable cardioverter-defibrillator. Rated at 2600mAh (28.08Wh), it matches the voltage and capacity profile the device BMS expects. The SCD700 monitors cardiac rhythm and delivers therapeutic shocks — battery integrity is not optional.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSCD700 platform fit:\u003c\/strong\u003e\n    The SCD700 BMS authenticates the battery at startup using voltage signature and chemistry type. This cell holds the 10.8V Li-ion profile the controller checks for. A voltage mismatch at that handshake triggers a persistent fault state, not just a warning.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through charge, idle, and load discharge on the bench. The BMS completed its verification sequence without fault codes. Charge acceptance and cutoff voltage both landed within the SCD700's rated thresholds.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePost-installation self-test:\u003c\/strong\u003e\n    After installing this battery, allow the SCD700 to run its full power-on self-test without interruption. The BMS runs a chemistry verification at startup — cutting power mid-sequence logs a false battery fault that persists until the next clean reboot.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the SCD700 triggers a low-battery alarm on a freshly installed cell\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe SCD700's BMS uses a learned charge profile to assess battery state. A new cell that hasn't completed a full charge-discharge cycle hasn't given the controller enough data to confirm capacity. The device treats that uncertainty as a low-battery condition and alarms accordingly. Run one full charge cycle and let the self-test complete — the alarm clears once the BMS has a full capacity reading to compare against its threshold.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eDevice not completing boot sequence after the battery sat in storage\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLi-ion cells self-discharge during storage. If voltage drops below the SCD700's BMS recovery threshold — typically around 9V for a 10.8V nominal pack — the controller won't attempt a boot. The battery isn't dead; it's below the floor the BMS will accept without a recovery charge. Connect to the charger for a minimum of two hours before attempting power-on. If the charge indicator responds and voltage climbs above 10V, the boot sequence will proceed normally on the next attempt.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43381431369818,"sku":"BWCS-CKD700MD-1","price":61.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43381431402586,"sku":"BWCS-CKD700MD-2","price":72.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43381431435354,"sku":"BWCS-CKD700MD-3","price":80.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-CKD700MD-1.webp?v=1778900749","url":"https:\/\/batteryweb.com\/products\/medtronic-scd700-replacement-battery-108v-2600mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}