{"product_id":"meec-800-replacement-battery-28v-5000mah-li-ion","title":"Meec 800 Replacement Battery 28V 5000mAh Li-ion","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eMeec 800 — 28V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 28V Li-ion replacement battery for the Meec 800 cordless lawn mower. It carries 5000mAh (140Wh) of capacity. It slots into the same bay as the original pack and uses the same blade motor power rail.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMeec 800 compatibility:\u003c\/strong\u003e\n    The 800 series runs a 28V motor bus. This pack matches that voltage rail and the physical connector orientation. The BMS communicates directly with the mower's motor controller — no voltage mismatch, no handshake error on startup.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack through repeated high-draw blade cycles simulating thick-grass loads. The BMS held steady through inrush spikes and tripped correctly under a deliberate overload condition, then reset cleanly after a short cooldown.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eSeasonal storage tip:\u003c\/strong\u003e\n    Before first mow of spring, bring the battery indoors overnight if temperatures are below 10°C. Cold Li-ion cells develop higher internal resistance, and the blade motor's inrush current on startup can trip the BMS on a cold pack before you've cut a single row.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBMS cutoff on thick-grass and wet-grass blade loads\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe Meec 800's blade motor pulls a sharp inrush current every time it bites into dense or wet grass. If that spike exceeds the BMS overcurrent threshold — around 20–25A on most 28V mower packs — the BMS shuts the output to protect the cells. This isn't a faulty battery; it's the protection circuit doing its job. To avoid repeat trips, slow your walking pace through thick sections so the blade motor doesn't stall. After a BMS trip, wait 30 seconds, then restart — the pack resets without any button press on this platform.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCharger shows fault light after the mower sat unused all winter\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eLi-ion packs self-discharge slowly over months. If the Meec 800 battery sat in an unheated garage from October to March, the cell voltage may have dropped below the charger's acceptance threshold — typically around 2.5V per cell. The charger sees a low-voltage pack and flags a fault rather than charging, as a safety measure. To recover the pack, try leaving it connected to the charger for 30–60 minutes — some chargers include a trickle-recovery mode that brings cells back above the 2.5V threshold before switching to normal charge current. If the fault light stays solid red after an hour, measure the pack voltage with a multimeter; below 20V total means the cells need a slow pre-charge cycle.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43381297447002,"sku":"BWCS-YFA800PW-1","price":98.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43381297479770,"sku":"BWCS-YFA800PW-2","price":116.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43381297512538,"sku":"BWCS-YFA800PW-3","price":129.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-YFA800PW-1.webp?v=1778899964","url":"https:\/\/batteryweb.com\/products\/meec-800-replacement-battery-28v-5000mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}