{"product_id":"memorex-mph-6050-replacement-battery-24v-300mah-ni-mh","title":"Memorex MPH-6050 Cordless Phone Replacement Battery 2.4V 300mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eMemorex MPH-6050 \/ MPH-8250 Series — 2.4V Ni-MH Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 2.4V, 300mAh Ni-MH replacement battery for Memorex cordless phone handsets. It fits the MPH-6050, MPH-6250, MPH-6250BAT, and MPH-8250 models. The pack slots into the handset compartment and restores the base-station charging cycle these phones depend on.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMPH-6050 \/ MPH-6250 \/ MPH-8250 shared battery platform:\u003c\/strong\u003e\n    These four handset models run the same 2.4V two-cell Ni-MH configuration with an identical footprint — 29.03 × 28.84 × 14.66mm — and share the same contact orientation, so one pack covers all four without adapter or modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through charge and discharge on a cordless phone test rig. The BMS accepted the base-station trickle charge without error, and voltage held stable at the 2.4V nominal rail through the full discharge curve.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-charge protocol for Ni-MH cordless handsets:\u003c\/strong\u003e\n    After installing this pack, seat the handset in the base for a full 16-hour charge before first use. Ni-MH cells in cordless phones ship partially discharged — a short first charge will not bring them to rated capacity, and the handset may report low battery within the first call.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBase station showing no charge or error light after swapping in a new Ni-MH pack\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eMemorex base stations use a voltage threshold check before initiating the trickle charge cycle. A new Ni-MH pack that has been in storage for several months can sit below that threshold — typically under 2.0V — which causes the base to flag a charge error or show no indicator at all. The fix is a short external boost charge or a direct connection to a Ni-MH charger to bring the pack above 2.1V. Once the pack clears the acceptance threshold, reseat it in the base and the charge indicator should activate normally.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eHandset not re-pairing with the base after battery replacement\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eRemoving the battery from a DECT handset cuts all power to the pairing memory on some Memorex models. When power is fully removed, the handset can lose its stored link to the base and come back up in an unregistered state. To fix this, hold the handset's page or find button while it is seated in the base — on most MPH-series units this triggers a re-registration sequence. If that does not work, run a full base reset by unplugging the base for 30 seconds, then re-register the handset from scratch.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43340071862362,"sku":"BWCS-BPT21CL-1","price":19.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43340071895130,"sku":"BWCS-BPT21CL-2","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43340071927898,"sku":"BWCS-BPT21CL-3","price":23.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-BPT21CL-1.webp?v=1778367024","url":"https:\/\/batteryweb.com\/products\/memorex-mph-6050-replacement-battery-24v-300mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}