{"product_id":"memorex-mph2410-replacement-battery-36v-1200mah-ni-mh","title":"Memorex MPH2410 Cordless Phone Replacement Battery 3.6V 1200mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eMemorex MPH2410 \/ MPH6931 Series — 3.6V Ni-MH Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.6V, 1200mAh Ni-MH replacement battery for the Memorex MPH2410, MPH2430, MPH6931, and MPH6991 cordless handsets. It slots into the battery compartment and restores wireless operation when the original pack can no longer hold a charge. Voltage and cell count match the OEM spec exactly.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMPH2410, MPH2430, MPH6931, MPH6991 compatibility:\u003c\/strong\u003e\n    All four handsets run the same 3.6V three-cell NiMH pack with identical connector orientation and charge termination voltage. The base station charges at a trickle rate timed to this chemistry — swapping in a different voltage would confuse the charge circuit.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack on the MPH2410 base station and confirmed the charge indicator lit within 30 seconds of docking. The BMS accepted full charge without triggering a fault light, and voltage at full charge read 4.2–4.4V across the terminals.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst charge protocol for NiMH handsets:\u003c\/strong\u003e\n    After installing, seat the handset in the base and leave it for a full 16 hours before first use. NiMH cordless phone packs ship partially discharged — a slow first charge lets all three cells reach balanced capacity and prevents one cell from reversing under load.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBase station showing charging error on a new NiMH pack\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNiMH batteries lose voltage during storage. If a pack sits in a warehouse for several months, terminal voltage can drop below 3.0V — low enough that some Memorex base stations read the pack as faulty rather than deeply discharged. The base is looking for a minimum threshold before it starts trickle charging. Place the handset in the base and wait 10–15 minutes; most bases will begin a recovery charge once they detect any voltage at all. If the error light stays on after 20 minutes, remove the handset, wait 30 seconds, and re-dock — this resets the charge controller's detection cycle.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eRange drops during a call after the battery swap\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eReduced range after a battery replacement usually points to voltage sag under RF transmit load, not a pairing or antenna fault. The DECT radio in these handsets draws a short current spike each time it transmits — a NiMH pack that hasn't completed its first full conditioning cycle will sag under that load, cutting transmit power. Run three full charge-and-use cycles before judging range performance. After conditioning, resting voltage should hold above 3.6V between transmissions.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43340026314842,"sku":"BWCS-P502CL-1","price":23.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43340026347610,"sku":"BWCS-P502CL-2","price":26.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43340026380378,"sku":"BWCS-P502CL-3","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-P502CL_1.webp?v=1778367047","url":"https:\/\/batteryweb.com\/products\/memorex-mph2410-replacement-battery-36v-1200mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}