{"product_id":"memorex-ybt3n800mah-replacement-battery-36v-1300mah-ni-mh","title":"Memorex YBT3N800MAH Cordless Phone Replacement Battery 3.6V 1300mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eMemorex YBT3N800MAH — 3.6V Ni-MH Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.6V, 1300mAh Ni-MH replacement battery for the Memorex YBT3N800MAH cordless phone handset. It replaces the original pack when the handset can no longer hold a charge between uses. Capacity is 1300mAh — higher than the original 800mAh rating in the model number.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eYBT3N800MAH handset fit:\u003c\/strong\u003e\n    This pack matches the 3.6V three-cell Ni-MH configuration used in the YBT3N800MAH handset. The connector and cell arrangement align with the original battery compartment. No voltage mismatch means the base station charges it through the same charge circuit without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through charge and discharge on a Ni-MH test fixture at 3.6V. The BMS accepted charge normally and cell balance stayed within spec across five full cycles. Capacity reached rated output by cycle three.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-charge protocol for Ni-MH handsets:\u003c\/strong\u003e\n    After installing, seat the handset in the base for a full 16 hours before first use. Ni-MH cordless phone batteries arrive partially discharged from storage and need one slow full charge to begin reaching rated capacity.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eTalk time shorter than expected after swapping this battery in\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eNi-MH cells do not deliver full capacity on the first charge cycle. The electrochemical pathways in new cells need three to five full charge-discharge cycles before capacity stabilises at the rated level. Running the handset until the low-battery indicator triggers, then returning it to the base for a full charge, completes one conditioning cycle. By cycle five, talk time should reflect the 1300mAh rating.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBase station charge light not coming on with new battery installed\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNi-MH batteries discharged during storage can drop below the voltage threshold the base station uses to detect a valid pack. If the base shows no charge light or an error indicator, the cell voltage is likely below the acceptance window. Remove the battery, let it sit at room temperature for 30 minutes, then reseat it firmly in the handset and place it back on the base. If the base still does not respond, check the handset contacts are clean and that the pack is reading at least 3.0V with a multimeter before returning to the base.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43340072845402,"sku":"BWCS-P501HL-1","price":26.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43340072878170,"sku":"BWCS-P501HL-2","price":30.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43340072910938,"sku":"BWCS-P501HL-3","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-P501HL-1.webp?v=1778367047","url":"https:\/\/batteryweb.com\/products\/memorex-ybt3n800mah-replacement-battery-36v-1300mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}