{"product_id":"micromax-e390-replacement-battery-37v-1200mah-li-ion","title":"Micromax E390 Replacement Battery BT-214 3.7V 1200mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eMicromax E390 \/ X335 — 3.7V Li-ion Replacement Battery (BT-214)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.7V, 1200mAh Li-ion replacement battery for the Micromax E390 and X335 smartphones. It carries OEM part number BT-214 and matches the original cell's voltage rail, connector, and physical footprint at 53.00 × 33.90 × 5.70mm. It slots directly into either handset without modification.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eE390 and X335 shared platform:\u003c\/strong\u003e\n    Both models draw from the same battery bay geometry and run the same 3.7V power rail, which is why they share BT-214. The connector pinout and BMS handshake protocol are identical across both devices, so one cell covers both.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through full charge and discharge on the E390 platform. The BMS accepted the charge curve without fault flags, and cell voltage held steady at 3.7V nominal through the full test cycle.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFuel gauge recalibration on first use:\u003c\/strong\u003e\n    On first use after fitting, disable fast charging if available and run one complete discharge-charge cycle at standard rate. This lets the fuel gauge IC map the new cell's actual discharge curve before the OS starts reporting percentages — skipping this step is the main cause of erratic percentage readings in the first week.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSudden shutdown at 20–30% on the BT-214 replacement cell\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a voltage cliff issue, not a faulty cell. When the modem transmits or the screen brightness spikes, current draw pulls the cell voltage below the BMS cutoff threshold — even if the OS still reports 20–30% remaining. The fuel gauge IC hasn't yet learned the new cell's actual voltage-to-capacity curve, so it misreads remaining capacity. Running two full discharge-charge cycles at standard charge current recalibrates the coulomb counter and eliminates most of these shutdowns. If shutdowns persist past three cycles, check that the battery connector is fully seated — poor contact increases resistance and accelerates the voltage drop under load.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003ePhone warm near the battery compartment during first charges\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eA new cell has slightly higher internal impedance than a well-cycled one, so the charge IC works harder to push current in during the first few sessions. This produces mild warmth near the battery bay — it is normal and fades after three to five cycles as impedance drops. If the phone becomes hot rather than warm, or if charging stops before reaching 100%, the charge IC may be throttling due to thermal protection. Let the phone cool to room temperature and resume charging at a lower ambient temperature to confirm.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43404285640794,"sku":"BWCS-DEP215SL-1","price":23.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43404285673562,"sku":"BWCS-DEP215SL-2","price":26.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43404285706330,"sku":"BWCS-DEP215SL-3","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-DEP215SL-1.webp?v=1779369550","url":"https:\/\/batteryweb.com\/products\/micromax-e390-replacement-battery-37v-1200mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}