{"product_id":"micros-mtablet-replacement-battery-37v-5000mah-li-polymer","title":"Micros mTablet SP3997132 Replacement Battery 3.7V 5000mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eMicros mTablet — 3.7V Li-Polymer Replacement Battery (SP3997132)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.7V, 5000mAh Li-Polymer battery is a direct replacement for the Micros mTablet. It fits the mTablet platform using OEM part number SP3997132. Install it when the original cell no longer holds a usable charge or shuts the tablet down early.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003emTablet platform fit:\u003c\/strong\u003e\n    The SP3997132 cell shares the same voltage rail and physical footprint across the mTablet line. The connector pinout and BMS handshake match the tablet's charge IC, so the device accepts the cell without firmware warnings.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell on an mTablet unit and confirmed the BMS negotiated correctly through charge and discharge. The protection circuit tripped at the expected low-voltage cutoff and recovered cleanly on reconnection.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFuel gauge recalibration after swap:\u003c\/strong\u003e\n    After fitting this battery, run the tablet down to automatic shutoff, then charge uninterrupted to 100% without interruption. This resets the fuel gauge IC against the new cell's actual capacity curve and clears the inaccurate percentage display that commonly appears after a swap.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMicros mTablet shutting down at 15–25% after battery replacement\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe mTablet's charge controller uses a stored voltage-to-capacity map calibrated to the original cell. A new cell with a different discharge curve hits a voltage cliff earlier than that map predicts, triggering shutdown while the reported percentage still shows charge remaining. The display backlight plus active WiFi together draw enough current to accelerate that voltage sag at low states of charge. One full discharge-to-shutoff cycle followed by an uninterrupted charge to 100% forces the fuel gauge to relearn the curve against the new cell.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003emTablet reporting wrong battery percentage after SP3997132 installation\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe fuel gauge IC on the mTablet holds calibration data from the old cell — cell age, internal resistance, and capacity fade all feed into that model. When a new cell goes in, the stored model no longer matches the actual cell chemistry, so percentage readings drift immediately. The fix is a single full recalibration cycle: discharge the tablet to automatic shutoff, then charge in one uninterrupted session to 100%. After that cycle the gauge reads against the new cell's actual voltage curve, and percentage accuracy stabilises at 3.7V nominal.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43425821917274,"sku":"BWCS-MTM100SL-1","price":43.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43425821950042,"sku":"BWCS-MTM100SL-2","price":51.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43425821982810,"sku":"BWCS-MTM100SL-3","price":56.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-MTM100SL-1.webp?v=1779929837","url":"https:\/\/batteryweb.com\/products\/micros-mtablet-replacement-battery-37v-5000mah-li-polymer","provider":"BatteryWeb","version":"1.0","type":"link"}