{"product_id":"microsoft-lumia-435-replacement-battery-37v-1300mah-li-ion","title":"Microsoft Lumia 435 Replacement Battery BV-5J 3.7V 1300mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eMicrosoft Lumia 435 \/ 532 — 3.7V Li-ion Replacement Battery (BV-5J)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.7V, 1300mAh Li-ion cell built to the BV-5J specification. It fits the Microsoft Lumia 435, Lumia 532, and RM-1070 variants. Capacity is 4.81Wh — identical to the original cell these phones shipped with.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLumia 435, 532, and RM-1070 fitment:\u003c\/strong\u003e\n    All three models use the same battery bay dimensions, contact pin layout, and BV-5J BMS handshake. The fuel gauge IC on each device reads the same cell chemistry signature, so the replacement registers correctly on first boot without manual pairing.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through charge and discharge on a Lumia 435 unit. The BMS accepted the charge profile without rejection, and the OS battery indicator tracked voltage correctly through the full curve. No false full or premature cutoff was observed.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFuel gauge recalibration after cell swap:\u003c\/strong\u003e\n    After fitting this battery, run one complete discharge down to automatic shutdown, then charge uninterrupted to 100% before normal use. This gives the coulomb counter a fresh reference curve against the new cell — skipping this step is the most common cause of erratic percentage readings post-swap.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSudden shutdown at 20–30% on the Lumia 435 after a cell swap\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe Lumia 435 modem and display together pull enough current to cause a brief voltage sag under load. A new cell with an uncalibrated fuel gauge IC will report 25% remaining while the actual resting voltage has already dropped below the OS shutdown threshold. The phone cuts out not because the cell is faulty, but because the coulomb counter is reading against the old cell's discharge curve. One full discharge-recharge cycle resets the reference and the shutdowns stop. After calibration, confirm the resting voltage reads above 3.6V at the reported 20% mark.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003ePhone won't power on after the BV-5J sat in storage\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLi-ion cells shipped or stored for extended periods can drop below 2.5V per cell — the threshold at which the BMS enters lockout to prevent damage. A locked-out BMS will not respond to a normal power button press, and the phone appears completely dead. Connect the device to a wall charger rated at least 1A and leave it for 15–20 minutes without pressing anything. The charge IC will trickle current into the cell until voltage climbs above the BMS re-enable threshold, typically around 2.9V, at which point normal charging resumes.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43404138938458,"sku":"BWCS-NK435SL-1","price":23.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43404138971226,"sku":"BWCS-NK435SL-2","price":26.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43404139003994,"sku":"BWCS-NK435SL-3","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-NK435SL-1.webp?v=1779369060","url":"https:\/\/batteryweb.com\/products\/microsoft-lumia-435-replacement-battery-37v-1300mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}