{"product_id":"mindray-epm-replacement-battery-111v-3800mah-li-ion","title":"Mindray LP13I001B EPM Replacement Battery 11.1V 3800mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eMindray EPM 700P \/ mobiEye 700 Series — 11.1V Li-ion Replacement Battery (LP13I001B)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 11.1V, 3800mAh lithium-ion battery replaces OEM part LP13I001B in Mindray's EPM-series portable patient monitors, including the 700P, mobiEye 700A, and MobiEye 700. It matches the original voltage rail and connector configuration for these clinical vital signs monitors. Capacity is 3800mAh (42.18Wh) as rated.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eEPM \/ mobiEye 700 platform fit:\u003c\/strong\u003e\n    These models share a common battery bay, BMS handshake protocol, and 11.1V three-cell architecture. One battery part number covers the full range because the charge IC and connector pinout are identical across this platform generation.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through the EPM monitor's full power-on sequence. The BMS authenticated without fault codes, and the charge circuit accepted a full charge-discharge cycle without thermal trip or state-of-charge error.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePost-installation self-test protocol:\u003c\/strong\u003e\n    After fitting this battery, allow the monitor to complete its power-on self-test without interruption. Mindray EPM devices run a BMS verification routine at startup — cutting power mid-sequence registers a false battery fault that persists until the next full reboot.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eEPM monitor not completing boot sequence on a new battery\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eMindray EPM monitors run a BMS learn cycle during the first few charge-discharge passes. On a fresh cell, the BMS has no stored capacity reference, so the boot sequence may stall or flag a battery error before clinical calibration is complete. This is not a fault with the cell — it is the monitor's charge IC applying conservative limits until the battery's internal resistance profile is mapped. Run one full charge-discharge cycle before placing the unit back in service.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eLow battery alarm triggers immediately after a confirmed full charge\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens when the BMS self-test threshold is calibrated to the OEM cell's internal resistance and the replacement cell hasn't yet completed its first full cycle. The monitor reads state-of-charge from voltage under load, and a new cell's resistance profile differs slightly from a conditioned one. After one complete charge-discharge cycle, the BMS recalibrates its threshold and the alarm clears. Confirm the cell is at or above 12.4V open-circuit before running the conditioning cycle.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43381396701274,"sku":"BWCS-MRY700MD-1","price":475.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43381396734042,"sku":"BWCS-MRY700MD-2","price":569.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43381396766810,"sku":"BWCS-MRY700MD-3","price":639.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-MRY700MD-1.webp?v=1778900564","url":"https:\/\/batteryweb.com\/products\/mindray-epm-replacement-battery-111v-3800mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}