{"product_id":"mindray-imec8-replacement-battery-111v-6800mah-li-ion","title":"Mindray IMEC8 Compatible Battery 11.1V 6800mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eMindray iMEC8 \/ iMEC10 \/ iPM8 \/ iPM10 — 11.1V Li-ion Replacement Battery (022-000383-00)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 11.1V 6800mAh Li-ion battery replaces OEM part 022-000383-00 in Mindray portable patient monitors. It fits the iMEC8, iMEC10, iPM8, and iPM10 series, along with 16 additional compatible models. Use it to restore battery-backed operation when AC power is unavailable during patient monitoring.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eiMEC and iPM series compatibility:\u003c\/strong\u003e\n    These models share a common battery bay geometry, 11.1V nominal rail, and the same BMS handshake protocol — which is why a single cell works across all of them. No adapter or wiring change required.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through a full charge-discharge cycle on an iMEC8 unit. The BMS completed its verification sequence without fault flags, and the charge IC accepted the cell without triggering a rejected-battery alarm.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePost-installation self-test cycle:\u003c\/strong\u003e\n    After fitting this battery, let the monitor complete its power-on self-test without interrupting it. The iMEC series runs a BMS verification step at startup — cutting power during this sequence can latch a false battery fault that won't clear until a full reboot.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCharge indicator not reaching 100% on the first charge cycle\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eMindray's charge IC applies a conservative current limit when it detects a new or unfamiliar cell. On the first charge, the monitor may stop at 95–98% and report a partial charge. This is the charge controller applying a reduced termination threshold — not a fault with the cell. Run one complete charge-discharge cycle and the IC recalibrates its termination voltage to the cell's actual full-charge point. After that cycle, the indicator will read 100% consistently.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMonitor will not power on after the replacement battery sat in storage\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLi-ion cells self-discharge during storage. If the cell voltage has dropped below the BMS recovery threshold — typically around 9V for an 11.1V nominal pack — the BMS locks out output to prevent cell damage, and the monitor shows no response at all. Connect the device to AC mains power first and leave it on charge for at least 30 minutes before attempting to power on from battery alone. This allows the charge IC to trickle-charge the pack above the BMS recovery threshold, after which normal charging resumes.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43381426389082,"sku":"BWCS-MPM800MX-1","price":112.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43381426421850,"sku":"BWCS-MPM800MX-2","price":131.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43381426454618,"sku":"BWCS-MPM800MX-3","price":146.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-MPM800MX-1.webp?v=1778900787","url":"https:\/\/batteryweb.com\/products\/mindray-imec8-replacement-battery-111v-6800mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}