{"product_id":"mindray-pm7000-replacement-battery-111v-5200mah-li-ion","title":"Mindray PM7000 Patient Monitor Replacement Battery 11.1V 5200mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eMindray PM7000 Series — 11.1V Li-ion Replacement Battery (M05-010001-06)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 11.1V 5200mAh (57.72Wh) Li-ion battery replaces the original cell in the Mindray PM7000 and compatible multiparameter patient monitors. It fits the PM7000, Accutorr V, DPM3, DPM4, and 25+ additional Mindray monitor platforms. Cross-references include OEM part numbers 0146-00-0099, 115-018015-00, LI23S003A, and MDR-M05-010001-06 among others.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePM7000 and Accutorr V platform fit:\u003c\/strong\u003e\n    These monitors share the same 11.1V battery bay, connector pinout, and BMS handshake protocol — one cell covers the full family without modification or adapters.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through charge-to-cutoff cycles on a PM7000 unit. The BMS completed its chemistry verification pass, accepted the full charge, and reported state-of-charge accurately through the monitor's battery indicator.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePower-on self-test after swap:\u003c\/strong\u003e\n    After installing this battery, let the monitor complete its full boot and self-test sequence without interruption. Mindray monitors run a BMS verification check at startup — cutting power during this window causes a persistent false battery fault that won't clear until the next full, uninterrupted reboot.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the PM7000 alarms low battery immediately after a confirmed full charge\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe PM7000's charge IC uses a conservative threshold table calibrated for the OEM cell's charge history. A new replacement cell with no prior cycles can report a state-of-charge value slightly below the monitor's minimum acceptance threshold on the first read. The BMS needs one complete charge-discharge cycle to build its internal capacity model for the new cell. After that cycle, the monitor reads the battery accurately and the low battery alarm stops triggering at full charge.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMonitor fails to power on after battery sat in storage\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLi-ion cells self-discharge during storage — if voltage drops below approximately 2.5V per cell (7.5V pack total), the Mindray BMS enters deep-discharge lockout and blocks power-on to protect the cells. The monitor will appear completely dead even with the battery installed. Connect the monitor to mains power and leave it on the charger for at least 30 minutes before attempting to power on — the charge IC applies a trickle recovery current that brings the pack back above the BMS re-enable threshold. Once the pack reaches 9V, the BMS releases the lockout and normal charging resumes.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43381475704922,"sku":"BWCS-MPM700MD-1","price":103.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43381475737690,"sku":"BWCS-MPM700MD-2","price":119.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43381475770458,"sku":"BWCS-MPM700MD-3","price":131.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-MPM700MD-1.webp?v=1778901067","url":"https:\/\/batteryweb.com\/products\/mindray-pm7000-replacement-battery-111v-5200mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}