{"product_id":"mitsubishi-microelite-3300-replacement-battery-37v-1400mah-li-ion","title":"Mitsubishi MICROELITE 3300 BP-1100 Replacement Battery 3.7V 1400mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eMitsubishi MICROELITE 3300 — 3.7V Li-ion Replacement Battery (BP-1100)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.7V, 1400mAh Li-ion cell replaces the BP-1100 battery in the Mitsubishi MICROELITE 3300 compact digital camera. It delivers 5.18Wh of capacity through the same form factor and connector as the original. At 55.50 x 20.00 x 20.30mm, it seats directly into the MICROELITE 3300 battery compartment.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMICROELITE 3300 fit:\u003c\/strong\u003e\n    The BP-1100 form factor is specific to this camera body. The connector orientation and cell dimensions match the original bay geometry, so no force is needed to seat the battery correctly.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through the MICROELITE 3300 body and a standard Li-ion charger. The BMS accepted the cell without fault flags, and the protection circuit tripped correctly at low-voltage cutoff.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-charge protocol for the MICROELITE 3300:\u003c\/strong\u003e\n    Run one complete charge cycle through the camera body or OEM charger before shooting. Some compact camera BMS systems only begin accurate battery-remaining calibration after the first full charge cycle is completed inside the device.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBattery percentage jumping on the MICROELITE 3300 display after fitting a new cell\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe MICROELITE 3300 maps battery percentage to a fixed voltage-threshold table calibrated against the original BP-1100 discharge curve. A fresh replacement cell has a slightly different resting voltage profile at mid-charge states, so the camera's indicator may read 80% one moment and drop to 60% the next without heavy use. This is a mapping mismatch, not a fault with the cell. Run two full charge-to-discharge cycles through the camera body to allow the BMS to re-anchor its readings against the new cell's actual discharge curve.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMICROELITE 3300 showing dead battery indicator on a cell that was just charged\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis usually occurs when the replacement cell has sat unused long enough for its resting voltage to drop below the camera's startup acceptance threshold, typically around 3.0V. The MICROELITE 3300 body may refuse to power on and display a depleted battery icon even if the cell technically holds charge. Place the cell in an external Li-ion charger rather than the camera body, charge until the charger shows full, then reinsert. If the camera accepts it at that point, one full external charge cycle has recovered the resting voltage above the 3.0V startup floor.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43333870551130,"sku":"BWCS-NP80FU-1","price":23.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43333870583898,"sku":"BWCS-NP80FU-2","price":26.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43333870616666,"sku":"BWCS-NP80FU-3","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-NP80FU_1.webp?v=1778213291","url":"https:\/\/batteryweb.com\/products\/mitsubishi-microelite-3300-replacement-battery-37v-1400mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}