{"product_id":"mitsubishi-microelite-3300-replacement-battery-37v-2400mah-li-ion","title":"Mitsubishi BP-1100 MICROELITE 3300 Replacement Battery 3.7V","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eMitsubishi MICROELITE 3300 — 3.7V Li-ion Replacement Battery (BP-1100)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.7V, 2400mAh Li-ion replacement for the BP-1100 battery used in the Mitsubishi MICROELITE 3300 digital camera. It replaces the original cell when capacity fade or charge failure cuts shooting sessions short. Voltage and form factor match the OEM spec at 55.50 × 20.00 × 20.40mm.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMICROELITE 3300 fit:\u003c\/strong\u003e\n    The MICROELITE 3300 runs a single-cell 3.7V rail with a BMS that monitors cell voltage and temperature. This replacement cell meets that voltage profile and uses a compatible BMS handshake so the camera body reads charge state correctly on first insertion.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through full charge and discharge on the bench. The BMS held cutoff voltage correctly at both ends of the curve — no premature low-voltage shutoff and no overcharge at the top.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-use charge cycle on MICROELITE 3300:\u003c\/strong\u003e\n    Complete one full charge via the OEM charger or camera body before your first shoot. The MICROELITE 3300 battery indicator calibrates its remaining-charge display against the cell's discharge curve during that initial cycle — skipping it causes the percentage readout to jump or read inaccurately from the start.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eFlash recycling time increasing on a fresh BP-1100 cell\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe MICROELITE 3300's flash capacitor draws a burst of current each time it recharges between shots. When cell voltage sags under that load — common near the end of a discharge cycle — the capacitor takes longer to reach full charge. This slows recycling time noticeably before the camera shows a low-battery warning. It is not a charger fault or flash unit failure. Watch for recycling lag as an early indicator that the cell is approaching its lower voltage threshold around 3.0V.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBattery percentage jumping erratically on the MICROELITE 3300 display\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens when the camera's charge indicator has not mapped its voltage thresholds to the new cell's discharge curve. The indicator firmware expects voltage to drop along a learned profile — a fresh or newly swapped cell reads differently until calibrated. Run one complete charge from empty to full inside the camera body or OEM charger. After that cycle, the display should track percentage smoothly against actual remaining capacity.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43333577113690,"sku":"BWCS-RDB200FU-1","price":43.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43333577146458,"sku":"BWCS-RDB200FU-2","price":50.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43333577179226,"sku":"BWCS-RDB200FU-3","price":55.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-RDB200FU-1.webp?v=1778212955","url":"https:\/\/batteryweb.com\/products\/mitsubishi-microelite-3300-replacement-battery-37v-2400mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}