{"product_id":"mobistel-el600-replacement-battery-37v-800mah-li-ion","title":"Mobistel EL600 Compatible Battery 3.7V 800mAh BTY26172","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eMobistel EL600 \/ EL600 Dual — 3.7V Li-ion Replacement Battery (BTY26172)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.7V, 800mAh Li-ion cell replacing the original BTY26172 battery in the Mobistel EL600 and EL600 Dual smartphones. The original cell degrades after repeated charge cycles and can no longer sustain voltage under modem or display load. This replacement restores normal operation in both single-SIM and Dual-SIM variants.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eEL600 and EL600 Dual compatibility:\u003c\/strong\u003e\n    Both variants share the same 3.7V battery rail, connector pinout, and physical footprint — 52.88 x 33.76 x 4.48mm. The BMS handshake requirements are identical across both models, so one cell covers both.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through charge and load on the EL600 platform. The BMS accepted the cell without fault codes, and the protection circuit responded correctly to over-discharge and over-current thresholds.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFuel gauge recalibration on first cycle:\u003c\/strong\u003e\n    Disable fast charging for the first complete discharge-charge cycle after installation. The fuel gauge IC recalibrates against the new cell's discharge curve during this cycle — running fast charge into an uncalibrated cell pushes current at the wrong rate and skews percentage readings from the start.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSudden shutdown at 20–30% on the EL600 after a cell swap\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens when the fuel gauge IC is still calibrated to the old cell's discharge curve. The new cell hits a voltage cliff earlier than the IC expects — the phone reads 25% but the cell voltage has already dropped below the threshold the modem or display can sustain. The phone cuts out rather than holding on. One full discharge-to-shutdown, then a full charge cycle corrects the IC's reference curve. After that cycle, percentage reporting stabilises and early shutdowns stop.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eEL600 not powering on after the replacement battery sat in storage\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLi-ion cells self-discharge in storage. If the BTY26172 cell drops below approximately 2.5V per cell, the BMS enters lockout to prevent further discharge damage. The phone will not respond to the power button and may show no charging indicator. Connect the phone to a wall charger — not a USB port — and leave it for 20–30 minutes before attempting to power on. The charge IC needs to push a trickle current to bring the cell above the BMS re-enable threshold, typically around 3.0V, before normal charging and boot can resume.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43405068042330,"sku":"BWCS-MEL600SL-1","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43405068075098,"sku":"BWCS-MEL600SL-2","price":25.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43405068107866,"sku":"BWCS-MEL600SL-3","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-MEL600SL-1.webp?v=1779369883","url":"https:\/\/batteryweb.com\/products\/mobistel-el600-replacement-battery-37v-800mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}