{"product_id":"mobistel-touch-el580-replacement-battery-37v-700mah-li-ion","title":"Mobistel Touch EL580 Replacement Battery BTY26163 3.7V 700mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eMobistel Touch EL580 \/ EL500 — 3.7V Li-ion Replacement Battery (BTY26163)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.7V, 700mAh Li-ion cell for the Mobistel Touch EL580 and EL500 smartphones. It replaces OEM part BTY26163 directly. If your phone no longer holds a charge or shuts down unexpectedly, this is the cell that failed.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eEL580 and EL500 shared platform:\u003c\/strong\u003e\n    Both models run the same voltage rail and use the same physical connector with an identical BMS handshake profile. One cell covers both devices without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through full charge and discharge on the EL580 platform. The BMS accepted the cell on first connection, charge termination triggered correctly at 4.2V, and the protection circuit tripped as expected under over-discharge conditions.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFuel gauge recalibration on first use:\u003c\/strong\u003e\n    On first installation, run the phone down to automatic shutdown without plugging in early, then charge to 100% uninterrupted. The EL580's fuel gauge IC is calibrated to the old cell's discharge curve — one full cycle resets that reference and stops erratic percentage readings.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the EL580 reports wrong battery percentage after a cell swap\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe EL580 uses a coulomb counter that tracks charge flow relative to a stored discharge curve from the original cell. A new cell has different internal resistance and a slightly different voltage-to-capacity relationship. Until the IC sees one complete discharge cycle on the new cell, it reads percentage against the wrong curve. This shows up as percentage jumps, early low-battery warnings, or the indicator freezing near 50%. One full discharge-to-shutdown and uninterrupted charge resolves it.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSudden shutdown at 20–30% on the replacement cell\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a voltage cliff problem, not a capacity problem. At low state of charge, the modem transmitting or the screen at full brightness pulls enough current to drop cell voltage below the BMS cutoff threshold — even though the percentage display suggests charge remains. The BMS then cuts output to protect the cell, and the phone shuts off hard. After the fuel gauge IC completes its first full calibration cycle, the shutdowns typically stop because the percentage reading now accurately reflects the usable voltage window. If shutdowns continue after calibration, check that the cell connector is fully seated — a partial connection raises contact resistance and worsens voltage sag under load.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43405090259034,"sku":"BWCS-MEL580SL-1","price":28.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43405090291802,"sku":"BWCS-MEL580SL-2","price":32.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43405090324570,"sku":"BWCS-MEL580SL-3","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-MEL580SL-1.webp?v=1779369956","url":"https:\/\/batteryweb.com\/products\/mobistel-touch-el580-replacement-battery-37v-700mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}