{"product_id":"motorola-moto-edge-plus-replacement-battery-387v-3800mah-li-polymer","title":"Motorola Moto Edge Plus LW50 Compatible Battery 3.87V 3800mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eMotorola Moto Edge Plus XT2061 Series — 3.87V Li-Polymer Replacement Battery (LW50)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3800mAh Li-Polymer cell replaces the LW50 battery in the Motorola Moto Edge Plus and Moto Edge+ (XT2061-1, XT2061-3). It runs at 3.87V nominal with a 14.71Wh total energy rating. If your Edge Plus is shutting down unexpectedly or no longer holding a charge, this is the direct cell swap.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eXT2061-1 and XT2061-3 fitment:\u003c\/strong\u003e\n    Both variants use the same battery bay dimensions, connector pinout, and BMS handshake protocol. The LW50 cell fits either board revision without modification — the fuel gauge IC communicates over the same two-wire interface on both.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through charge and discharge cycles on an XT2061 board. The BMS accepted charge current without fault flags, and the coulomb counter tracked state-of-charge correctly after one full calibration cycle.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFuel gauge recalibration on first use:\u003c\/strong\u003e\n    On first use after installation, disable fast charging for one complete discharge-charge cycle. This lets the fuel gauge IC map the new cell's discharge curve before high-current charging is applied to an uncalibrated cell.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSudden shutdown at 20–30% on the replacement cell\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe Edge Plus modem and display draw heavy current spikes, especially during 5G handoffs or screen-on wake events. A fresh cell with an uncalibrated fuel gauge IC can report 25% state-of-charge while the actual cell voltage has already sagged below the BMS cutoff threshold under that load. The BMS trips the protection circuit and the phone cuts power instantly — not a software crash. Run one full drain-to-shutdown followed by an uninterrupted charge to 100% to anchor the coulomb counter to the new cell's actual capacity endpoints.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eUSB-PD fast charge not engaging after installation\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe Edge Plus uses Motorola's TurboPower protocol, which requires a handshake between the charge IC and the battery BMS before high-voltage fast charging activates. On the first cycle after a cell swap, the charge IC may default to standard 5V\/0.9A charging while it verifies BMS state. This is expected behaviour — not a fault with the charger or the cable. Complete one full standard charge cycle first; TurboPower handshake typically resumes on the second charge session once the BMS registers a valid charge history.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43391871615066,"sku":"BWCS-MXT261SL-1","price":26.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43391871647834,"sku":"BWCS-MXT261SL-2","price":30.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43391871680602,"sku":"BWCS-MXT261SL-3","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-MXT261SL-1.webp?v=1779142413","url":"https:\/\/batteryweb.com\/products\/motorola-moto-edge-plus-replacement-battery-387v-3800mah-li-polymer","provider":"BatteryWeb","version":"1.0","type":"link"}