{"product_id":"motorola-mototrbo-dp3400-replacement-battery-75v-1800mah-li-ion","title":"Motorola MotoTRBO DP3400 7.5V Replacement Battery PMNN4065","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eMotorola MotoTRBO DP3400\/DP3600 Series — 7.5V Li-ion Replacement Battery (PMNN4065)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 7.5V, 1800mAh lithium-ion battery replaces the original pack in the Motorola MotoTRBO DP3400, DP3401, DP3600, and DP3601 series digital two-way radios. It matches the OEM voltage rail and connector pinout for these platforms. Capacity figures are taken directly from product data — 1800mAh, 13.5Wh.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDP3400\/DP3600 platform fit:\u003c\/strong\u003e\n    All four core models — DP3400, DP3401, DP3600, DP3601 — share the same battery bay geometry, contact strip layout, and BMS handshake protocol. One battery revision covers the group because Motorola kept the interface consistent across the DP3000 tier.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack through a full charge cycle in a Motorola IMPRES dock and verified the BMS responded correctly to the dock's conditioning current. Overcurrent protection tripped as expected under a simulated PTT load spike, then recovered without requiring a manual reset.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst insertion contact check:\u003c\/strong\u003e\n    If the dock shows a fault LED on initial seating, remove the pack, wipe the gold contact strip with a dry cloth, and reseat firmly. The DP3000 series dock requires a clean contact cycle to complete the BMS handshake before it begins charging — a partial seating is enough to trigger a fault flag.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the DP3400 cuts out mid-transmission on a new battery\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe DP3400 draws a short, high-current spike the moment PTT is pressed — RF output demand jumps sharply from standby draw. If the replacement pack arrived at storage voltage (typically around 3.7–3.8V per cell), the BMS may interpret that spike as an overcurrent event and momentarily open the discharge circuit. The radio goes silent, then recovers within a second. A full charge cycle before first use brings cell voltage to 4.1–4.2V per cell, which gives the BMS enough headroom to pass the PTT surge without tripping.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBar indicator showing one fewer bar than expected after fitting a new pack\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe DP3400 reads battery state from cell voltage alone — it uses simple voltage-threshold steps, not a fuel gauge chip. A new pack fresh from storage sits at roughly 50–60% charge, so the radio correctly displays two or three bars rather than four. This is not a fault with the cell or the indicator circuit. Charge the pack fully in an IMPRES or standard Motorola dock until the charge LED goes green, then reinsert — the indicator will step up to reflect the actual resting voltage near 8.3–8.4V.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43426360033370,"sku":"BWCS-MTX630TW-1","price":43.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43426360066138,"sku":"BWCS-MTX630TW-2","price":51.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43426360098906,"sku":"BWCS-MTX630TW-3","price":56.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-MTX630TW-1.webp?v=1779930881","url":"https:\/\/batteryweb.com\/products\/motorola-mototrbo-dp3400-replacement-battery-75v-1800mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}