{"product_id":"mtc-3937-megatech-replacement-battery-84v-3000mah-ni-mh","title":"MTC 3937 MEGATECH Cordless Vacuum Compatible Battery 8.4V 3000mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eMTC 3937 Megatech — 8.4V Ni-MH Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is an 8.4V, 3000mAh Ni-MH replacement battery for the MTC 3937 Megatech cordless vacuum cleaner. It replaces the original cell pack when capacity fade leaves the vacuum unable to finish a cleaning pass. Dimensions are 88.10 × 89.90 × 22.70mm — confirm these against your existing pack before ordering.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003e3937 Megatech fit:\u003c\/strong\u003e\n    The 3937 Megatech uses an 8.4V Ni-MH pack at this specific form factor. Voltage and physical size both need to match — a different voltage rail will either under-drive the motor or prevent the charger from completing a full cycle.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through full charge and discharge runs and monitored the BMS response under sustained motor load. Current draw stayed within rated limits and the protection circuit did not trip under normal operating conditions.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging behaviour on Ni-MH vacuums:\u003c\/strong\u003e\n    Do not leave the 3937 Megatech sitting on the charging dock permanently. Continuous trickle charge on Ni-MH cells accelerates capacity fade faster than regular charge-and-remove cycles. Charge to full, then disconnect from the dock.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping before the battery indicator reaches low\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens when the motor draws more current than the pack can sustain at its present state of charge, causing voltage to sag before the indicator logic triggers. A clogged filter makes this worse — restricted airflow forces the motor to work harder, pulling higher current and accelerating the voltage drop. Clean the filter first. If suction still fades early after a full charge on a new pack, the charger may not be completing the charge cycle, leaving the cells at 7.8–8.0V instead of the full 8.4V.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMotor cuts out mid-use and then recovers after a short pause\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a BMS overcurrent trip, not a dead battery. When airflow is restricted — usually a blocked filter or a tangled brush roll — the motor draws a sustained current spike that pushes past the protection threshold. The BMS shuts the output, the motor stops, and the circuit resets after the cells cool slightly. Clear the filter and check the brush roll before assuming the battery is faulty. If the cutout still happens on a clean vacuum, check that the charger brought the pack to a full 8.4V before use.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43428048011354,"sku":"BWCS-PBS007VX-1","price":64.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43428048044122,"sku":"BWCS-PBS007VX-2","price":74.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43428048076890,"sku":"BWCS-PBS007VX-3","price":82.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-PBS007VX-1.webp?v=1779933966","url":"https:\/\/batteryweb.com\/products\/mtc-3937-megatech-replacement-battery-84v-3000mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}