{"product_id":"nec-dx2e-dhal-a1-replacement-battery-24v-700mah-ni-mh","title":"NEC DX2E-DHAL-A1 Compatible Battery 2.4V 700mAh Ni-MH","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eNEC DX2E-DHAL-A1 — 2.4V Ni-MH 700mAh Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 2.4V, 700mAh Ni-MH battery pack for the NEC DX2E-DHAL-A1 cordless phone handset. It replaces the original cell when the handset stops holding a charge or talk time has dropped significantly. Voltage and capacity match the original spec exactly — no modification to the handset is needed.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDX2E-DHAL-A1 handset fit:\u003c\/strong\u003e\n    This model uses a compact 2.4V dual-cell Ni-MH pack with a specific footprint (6.00 × 33.00 × 48.00mm). The connector orientation and cell arrangement match the original, so the pack seats correctly in the battery compartment without forcing.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through charge and discharge on the DX2E-DHAL-A1 platform and confirmed the base station accepted the charge without triggering an error state. BMS handoff between handset and base behaved as expected from the second cycle onward.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-charge protocol for Ni-MH cordless packs:\u003c\/strong\u003e\n    After installing, place the handset in the base cradle for a full 16-hour charge before use. Ni-MH cells shipped in a partial state need a slow, full first charge to reach rated capacity — skipping this step leaves usable capacity on the table for the first several cycles.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eTalk time shorter than the original battery after replacement\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNi-MH cells are not at full capacity when shipped — they leave the factory partially charged and then continue to self-discharge in storage. A new pack can feel weaker than expected for the first three to five charge cycles. Each full charge and discharge cycle allows the cells to reach closer to their 700mAh rated capacity. By cycle four or five, talk time should align with what the original battery delivered when it was new.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBase station showing no charge or flashing error light with new pack installed\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNEC base stations check the incoming voltage from the handset battery before committing to a charge cycle. A pack that has dropped below roughly 2.0V during storage may sit outside the base's acceptance window, causing the charge indicator to flash or show no activity. Remove the handset, wait 30 seconds, then reseat it firmly in the cradle — full contact on the charging pins is required. If the base still shows an error, leave the handset seated for 20 minutes; some chargers apply a trickle recovery current before switching to normal charge mode.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43340058951770,"sku":"BWCS-NS3098CL-1","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43340058984538,"sku":"BWCS-NS3098CL-2","price":25.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43340059017306,"sku":"BWCS-NS3098CL-3","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-NS3098CL-1.webp?v=1778367047","url":"https:\/\/batteryweb.com\/products\/nec-dx2e-dhal-a1-replacement-battery-24v-700mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}