{"product_id":"neeo-control-4-replacement-battery-37v-1200mah-li-polymer","title":"Neeo Control 4 AHB404066 Replacement Battery 3.7V 1200mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eNeeo Control 4 \/ NE-RMT — 3.7V Li-Polymer Replacement Battery (AHB404066)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.7V, 1200mAh lithium-polymer battery for the Neeo Control 4 and NE-RMT smart home remote controls. It replaces OEM part AHB404066 when the original cell no longer holds a charge. Dimensions are 68.20 × 39.50 × 4.00mm — confirm against your existing cell before installing.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eControl 4 and NE-RMT compatibility:\u003c\/strong\u003e\n    Both the Control 4 and NE-RMT remotes run on the same 3.7V Li-Polymer cell with identical connector pinout and BMS handshake. One battery covers both models.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through full charge and discharge passes on the NE-RMT. The BMS held the cutoff voltage correctly at both ends — no early shutdown, no overcharge flag.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eConnector seating on the Control 4 remote:\u003c\/strong\u003e\n    The flat Li-Polymer connector on this remote needs firm, even pressure to seat fully. A half-inserted connector causes intermittent power loss that looks like a dead battery. Press until you feel the latch click before reassembling the back cover.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the Control 4 remote drains faster after a software update\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eFirmware updates on the Control 4 platform can increase polling frequency between the remote and the home controller hub. Higher polling means the RF or IR transmitter fires more often in the background, drawing more current even during idle periods. If your original battery lasted months and the replacement drains in weeks, check the Neeo app for a firmware rollback option or reduce the remote's update interval in the Control 4 director settings. A resting voltage of 3.6–3.7V after a full charge confirms the cell itself is not the issue.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eRemote shows charging but voltage won't climb past 3.5V\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eA Li-Polymer cell left fully depleted for an extended period can drop below the BMS recovery threshold — typically around 2.5V — and the charger may report activity without actually recovering the cell. The BMS enters a trickle pre-charge state and may stall there if the cell voltage is too far gone. Disconnect the remote, wait 10 minutes, then reconnect to force a BMS re-initialisation cycle. If the cell still won't climb past 3.5V after 30 minutes on charge, the old cell has reached end of life and the AHB404066 replacement is the correct next step.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43416098701402,"sku":"BWCS-NER100SL-1","price":36.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43416098734170,"sku":"BWCS-NER100SL-2","price":42.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43416098766938,"sku":"BWCS-NER100SL-3","price":47.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-NER100SL-1.webp?v=1779760285","url":"https:\/\/batteryweb.com\/products\/neeo-control-4-replacement-battery-37v-1200mah-li-polymer","provider":"BatteryWeb","version":"1.0","type":"link"}