{"product_id":"net10-savvy-replacement-battery-37v-1600mah-li-ion","title":"NET10 Savvy 3.7V 1600mAh Replacement Battery Li-ion","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eNET10 Savvy \/ Z750C — 3.7V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.7V, 1600mAh Li-ion cell replaces the original battery in the NET10 Savvy, Z750, and Z750C smartphones. It restores power for calls, messaging, and standard smartphone functions where the original cell has degraded or failed to hold a charge. Capacity is rated at 5.92Wh — matching OEM spec for this platform.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSavvy \/ Z750 platform fit:\u003c\/strong\u003e\n    The Z750 and Z750C share the same battery bay dimensions and connector pinout — 59.40 x 46.00 x 5.10mm — so both models draw from the same cell spec. The BMS on this replacement communicates with the phone's charge IC using the same handshake the original cell used.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through charge and discharge cycles on the Z750C platform. The BMS held cutoff correctly at both ends, and the charge IC accepted the cell without triggering fault flags on the second cycle after an initial calibration pass.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFuel gauge recalibration on first use:\u003c\/strong\u003e\n    On first installation, run one complete discharge down to automatic shutdown, then charge to 100% without interruption. The Savvy's fuel gauge IC was calibrated to the old cell's discharge curve — skipping this step causes the percentage counter to read incorrectly against the new cell.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the NET10 Savvy reports wrong battery percentage after a cell swap\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe Savvy uses a coulomb-counting fuel gauge IC that builds its percentage model from accumulated charge and discharge data on the original cell. When you drop in a new cell, the IC still references that old discharge curve. The percentage displayed can read 20–30% higher or lower than actual state of charge until the IC relearns. One full uninterrupted discharge-to-shutdown followed by a full charge to 100% forces the IC to reset its reference points against the new cell's actual curve.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSudden shutdown at 20–25% on the Z750C after replacement\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens when the modem or display draws a current spike the cell voltage cannot sustain — the cell voltage drops below the BMS cutoff threshold even though the gauge still reads charge remaining. It is most common in the first few cycles before the fuel gauge IC has recalibrated. After the first full calibration cycle described above, the gauge tracks the actual voltage floor more accurately. If shutdowns continue past three full cycles, check that the cell terminals are seated flush — intermittent contact raises internal resistance and accelerates the voltage sag under load, triggering BMS cutoff before 3.0V per cell.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43404291145818,"sku":"BWCS-ZTN970XL-1","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43404291178586,"sku":"BWCS-ZTN970XL-2","price":25.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43404291211354,"sku":"BWCS-ZTN970XL-3","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-ZTN970XL-1.webp?v=1779369658","url":"https:\/\/batteryweb.com\/products\/net10-savvy-replacement-battery-37v-1600mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}