{"product_id":"net10-z665-replacement-battery-37v-1500mah-li-ion","title":"NET10 Z665 Replacement Battery 3.7V 1500mAh Li-ion","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eNET10 Z665 \/ Z665C \/ Valet — 3.7V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.7V, 1500mAh Li-ion cell replaces the original battery in the NET10 Z665, Z665C, and Valet smartphones. It fits the same physical footprint at 41 × 51 × 6mm and connects to the same three-contact board interface. Swap it when the original cell no longer holds a charge through a normal day of use.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eZ665, Z665C, and Valet compatibility:\u003c\/strong\u003e\n    All three models share the same 3.7V battery bay, connector pinout, and BMS handshake requirements — one cell covers the full lineup without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through charge and discharge on the Z665 platform. The BMS accepted the cell on first insertion, protection thresholds fired correctly at low-voltage cutoff, and the charge IC completed a full cycle without fault flags.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFuel gauge recalibration on first use:\u003c\/strong\u003e\n    After installing this cell, run one full discharge-to-charge cycle with fast charging disabled. The Z665 fuel gauge IC was calibrated to the old cell's discharge curve — giving it one clean cycle lets it remap the new cell's characteristics before resuming normal charge rates.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSudden shutdown at 20–30% on the Z665 after a cell swap\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe Z665 fuel gauge IC stores the discharge curve of the original cell in memory. A new cell with different internal impedance hits a voltage cliff at a different state of charge — the phone reads 25% but the cell voltage has already dropped below the modem's minimum operating rail. The processor shuts down to protect the hardware, even though the reported percentage suggests charge remains. One full discharge-to-zero and back to 100% forces the coulomb counter to rebuild its reference map against the new cell, and the shutdowns stop.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003ePhone warm near the battery during the first few charges\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eA new Li-ion cell has higher internal impedance than a broken-in one. The Z665 charge IC pushes current into this higher-resistance cell, and some of that energy converts to heat rather than stored charge. This is normal for the first two to three cycles and fades as the cell's impedance settles. If the phone remains warm past the third full cycle, check that the charging port is clear and the charge IC is not stuck in a high-current stage — plug in, let it reach 100%, and confirm the charge indicator drops off cleanly.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43405070237786,"sku":"BWCS-ZTN760SL-1","price":21.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43405070270554,"sku":"BWCS-ZTN760SL-2","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43405070303322,"sku":"BWCS-ZTN760SL-3","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-ZTN760SL-1.webp?v=1779369934","url":"https:\/\/batteryweb.com\/products\/net10-z665-replacement-battery-37v-1500mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}