{"product_id":"netgear-nighthawk-m1-replacement-battery-37v-5000mah-li-polymer","title":"Netgear NightHawk M1 W-10 Compatible Battery 3.7V 5000mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eNetgear NightHawk M1 \/ MR1100 — 3.7V Li-Polymer Replacement Battery (W-10, 308-10019-01)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.7V 5000mAh (18.5Wh) lithium-polymer battery for the Netgear NightHawk M1 and MR1100 mobile hotspot. It replaces OEM part numbers W-10 and 308-10019-01. If your hotspot is dying mid-session or no longer lasting through a full day of use, this is a direct swap for the original cell.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eNightHawk M1 and MR1100 fit:\u003c\/strong\u003e\n    Both the M1 and MR1100 use the same battery bay, connector, and BMS handshake. The hotspot's firmware reads charge state over a single-wire communication line — this battery responds to that signal correctly, so the charge indicator on the screen reflects actual capacity rather than a fixed or stuck reading.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this battery in an MR1100 under simultaneous WiFi and LTE load with five connected clients. The BMS held stable voltage through the draw cycle and did not trigger a low-voltage cutoff at normal operating levels.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eVentilation during extended sessions:\u003c\/strong\u003e\n    Keep the hotspot flat on an open surface — not in a bag or pocket — during long sessions. When client devices are far from the unit, the cellular radio runs at maximum output power. That heat builds up in the battery cavity and accelerates cell wear over time.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the NightHawk M1 drops connected devices mid-session on a new battery\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe M1 drives two separate high-draw subsystems at once — the LTE modem and the dual-band WiFi radio. At maximum client connections, combined current draw spikes sharply. If the battery's internal resistance is elevated — common in a worn original cell — voltage sags below the modem's operating threshold for a fraction of a second, causing the LTE link to drop and taking all connected clients with it. A fresh 5000mAh cell with low internal resistance sustains the voltage rail through those spikes. If drops continue after replacement, check that the device firmware is current, as some M1 firmware versions have known modem restart bugs unrelated to battery condition.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eNightHawk M1 won't power on after sitting unused for several weeks\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLithium-polymer cells self-discharge slowly in storage. If the M1 sat unused long enough, the battery may have dropped below the minimum boot voltage — typically around 3.0V per cell — and the device's BMS locks out discharge to prevent damage. Plug the hotspot into its original charger and leave it connected for at least 20–30 minutes before attempting to power on. The charger applies a trickle current that brings the cell back above the BMS re-enable threshold, after which normal charging resumes. If the device still won't respond after an hour on charge, check that the charger is delivering output — the M1 uses a USB-C port and some third-party cables lack the correct power delivery handshake.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43377828724826,"sku":"BWCS-NTG110SL-1","price":32.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43377828757594,"sku":"BWCS-NTG110SL-2","price":37.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43377828790362,"sku":"BWCS-NTG110SL-3","price":41.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-NTG110SL-1.webp?v=1778773879","url":"https:\/\/batteryweb.com\/products\/netgear-nighthawk-m1-replacement-battery-37v-5000mah-li-polymer","provider":"BatteryWeb","version":"1.0","type":"link"}