{"product_id":"nitecore-u27-pro-replacement-battery-37v-1100mah-li-ion","title":"Nitecore HLB1500 U27 Pro Replacement Battery 3.7V 1100mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eNitecore U27 Pro \/ UT27 — 3.7V Li-ion Replacement Battery (HLB1500)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.7V, 1100mAh Li-ion replacement battery with OEM part number HLB1500. It fits the Nitecore U27 Pro and UT27 flashlights. The original cell degrades after repeated charge cycles — this restores the light's full output capability.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eU27 Pro and UT27 compatibility:\u003c\/strong\u003e\n    Both models share the same battery bay dimensions and voltage rail. The HLB1500 cell matches the 44.90 × 31.10 × 9.00mm footprint and the 3.7V nominal input the driver circuit expects. No modifications needed to fit the cell.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through full charge and discharge on the U27 Pro driver board. The BMS correctly flagged the low-voltage cutoff and the driver stepped down output as the cell reached depletion — no unexpected shutoffs or false-full readings during testing.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eSingle-cell flashlight storage tip:\u003c\/strong\u003e\n    If storing the U27 Pro unused for more than a month, discharge the cell to around 3.6–3.7V before storage. Leaving a Li-ion cell at full charge for extended periods accelerates capacity loss in the top voltage window.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the U27 Pro dims before the low-battery indicator triggers\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe U27 Pro's driver circuit monitors cell voltage continuously. As the cell approaches its low-voltage threshold, the driver reduces current to the LED — this is brownout protection stepping down output to avoid a hard cutoff. The indicator LED may not flag low battery until the cell drops below its trigger voltage, which happens after the driver has already reduced brightness. This is normal behaviour, not a fault with the cell or the driver.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eFlashlight cycling through modes or flickering near end of charge\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eIf the U27 Pro flickers or cycles modes unprompted, the cell voltage has likely sagged below the minimum the driver needs to hold a stable output level. A degraded original cell can sit at a nominal reading but sag sharply under load. Swap in the replacement HLB1500 and charge fully before testing — the driver needs to see a stable 3.7V nominal at the terminals to hold mode selection. Confirm with a multimeter that the charged cell reads at least 4.1V before reinserting.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43377477681242,"sku":"BWCS-PTE682FT-1","price":43.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43377477714010,"sku":"BWCS-PTE682FT-2","price":51.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43377477746778,"sku":"BWCS-PTE682FT-3","price":56.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-PTE682FT-1.webp?v=1778767154","url":"https:\/\/batteryweb.com\/products\/nitecore-u27-pro-replacement-battery-37v-1100mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}