{"product_id":"nitecore-ut27-replacement-battery-37v-1300mah-li-polymer","title":"Nitecore UT27 Tactical Flashlight Compatible Battery 3.7V 1300mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eNitecore UT27 — 3.7V Li-Polymer Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.7V 1300mAh (4.81Wh) Li-Polymer battery replaces the internal cell in the Nitecore UT27 tactical flashlight. The UT27 is a compact dual-switch EDC light used in law enforcement and outdoor roles. When the original cell degrades, output steps down permanently — this swap restores full driver headroom across all brightness levels.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eUT27 cell fitment:\u003c\/strong\u003e\n    The UT27 uses a flat Li-Polymer cell mounted directly behind the driver board. The 44.70 × 35.00 × 12.20mm form factor matches the OEM cell footprint exactly — no gap, no pressure fit required. The driver reads cell voltage directly, so a fresh cell with correct internal resistance restores accurate low-battery signalling.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through full charge and multi-mode discharge cycles on the UT27 platform. The BMS accepted the cell without flagging a fault, and the driver stepped through all modes — including turbo — without an early brownout cutoff. Low-battery indicator triggered at the correct threshold.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eTurbo-mode thermal handling:\u003c\/strong\u003e\n    The UT27 driver pulls significantly more current in turbo than in standard or mid modes. After extended turbo use, let the cell rest for a few minutes before recharging — Li-Polymer cells should not be charged while still warm from a high-draw session, as heat accelerates electrolyte degradation at the anode.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the UT27 steps down output before the low-battery indicator fires\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe UT27 driver monitors cell voltage in real time and begins reducing current to the LED once voltage drops below its brownout threshold — typically around 3.2–3.3V under load. This stepdown happens before the low-battery indicator triggers because the indicator responds to resting voltage, not loaded voltage. A cell with high internal resistance from age or cycle wear will sag further under turbo's current draw, triggering the stepdown early even when the indicator still shows charge remaining. Replacing the cell lowers internal resistance and closes the gap between resting and loaded voltage readings.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eUT27 turbo runtime noticeably shorter than spec after a few months\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLi-Polymer cells lose capacity faster under high-current cycling. Turbo mode draws several times more current than standard mode, and each deep turbo discharge accelerates capacity fade in the cell. After enough cycles, the cell can no longer sustain the current turbo demands without the driver stepping down output early. If full-power turbo runs are now shorter than when the light was new, the cell has degraded — charge the replacement to 4.2V before first use and avoid leaving it fully discharged between sessions.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43377472667738,"sku":"BWCS-BDS350FT-1","price":38.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43377472700506,"sku":"BWCS-BDS350FT-2","price":45.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43377472733274,"sku":"BWCS-BDS350FT-3","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-BDS350FT-1.webp?v=1778767153","url":"https:\/\/batteryweb.com\/products\/nitecore-ut27-replacement-battery-37v-1300mah-li-polymer","provider":"BatteryWeb","version":"1.0","type":"link"}