{"product_id":"nokia-9210-replacement-battery-37v-1200mah-li-ion","title":"Nokia BLL-3 Replacement Battery for 9210 3.7V 1200mAh Li-ion","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eNokia 9210 Communicator Series — 3.7V Li-ion Replacement Battery (BLL-3)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.7V Li-ion 1200mAh replacement cell for the Nokia 9210 Communicator and related models including the 9210i, 9200, and 9200i. The BLL-3 is the original part number covering this family of early 2000s business communicator devices. The battery slots into the same compartment as the original and connects via the same three-contact interface.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003e9200 and 9210 series fitment:\u003c\/strong\u003e\n    Nokia used the same BLL-3 cell across the 9200 and 9210 families because the voltage rail, physical dimensions, and connector pinout are identical across both generations. The BMS handshake requirements did not change between revisions, so one cell covers all four main variants.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell on a 9210i unit and confirmed the BMS accepted the new cell without error flags. Charge acceptance was normal from the first cycle, and the protection circuit tripped correctly at low-voltage cutoff during discharge testing.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFuel gauge recalibration after cell swap:\u003c\/strong\u003e\n    After fitting this battery, run one complete discharge down to automatic shutdown, then charge uninterrupted to 100% before resuming normal use. This resets the fuel gauge IC against the new cell's discharge curve and prevents erratic percentage readings from the first day of use.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the 9210 reports wrong battery percentage after a cell swap\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe Nokia 9210 uses a fuel gauge IC that builds its capacity model from previous discharge cycles. When the original degraded cell is replaced, the IC still references the old cell's worn discharge curve. This causes the reported percentage to lag behind actual charge state — sometimes reading 40% when the cell is near flat. One full discharge-to-shutdown followed by an uninterrupted full charge forces the IC to recalculate against the new cell's actual capacity. After that single calibration cycle, percentage reporting stabilises.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSudden shutdown at 20–30% on the 9210 after replacement\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens when the fuel gauge IC has not yet recalibrated after the cell swap. The old capacity model predicts voltage will hold at 20–30%, but the new cell — operating on an uncalibrated curve — drops below the BMS cutoff voltage under load from the screen or radio before the gauge catches up. The device cuts out abruptly because the BMS is responding to actual cell voltage, not the displayed percentage. Run the calibration cycle described above and confirm the cell rests at approximately 4.1–4.2V after a full charge before resuming daily use.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43409483235418,"sku":"BWCS-NKL3SL-1","price":23.99,"currency_code":"USD","in_stock":false},{"title":"Warranty 2 Year","offer_id":43409483268186,"sku":"BWCS-NKL3SL-2","price":26.99,"currency_code":"USD","in_stock":false},{"title":"Warranty 3 Year","offer_id":43409483300954,"sku":"BWCS-NKL3SL-3","price":28.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-NKL3SL-big.webp?v=1779579815","url":"https:\/\/batteryweb.com\/products\/nokia-9210-replacement-battery-37v-1200mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}