{"product_id":"nokia-lumia-435-replacement-battery-37v-1300mah-li-ion","title":"Nokia Lumia 435 Replacement Battery BV-5J 3.7V 1300mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eNokia Lumia 435 \/ Lumia 532 — 3.7V Li-ion Replacement Battery (BV-5J)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.7V, 1300mAh Li-ion cell that replaces the OEM BV-5J battery in the Nokia Lumia 435, Lumia 532, and RM-1070. All three models use the same battery bay dimensions, connector, and BMS handshake protocol. Capacity is 1300mAh (4.81Wh), matching the original Nokia specification.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLumia 435, 532, and RM-1070 compatibility:\u003c\/strong\u003e\n    These three models share an identical battery cavity at 60.00 × 37.90 × 5.72mm, the same 3.7V nominal voltage rail, and the same three-pin connector layout. The BMS handshake requirement is consistent across all three, so one cell covers the full group.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through a full discharge-charge sequence on a Lumia 532 test unit. The BMS accepted the cell without error flags, charge termination triggered correctly at 4.2V, and the fuel gauge IC tracked state-of-charge without reset prompts.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFuel gauge recalibration on first use:\u003c\/strong\u003e\n    After fitting this cell, disable any fast-charge mode and run one complete discharge down to automatic shutdown, then charge uninterrupted to 100%. This gives the fuel gauge IC one full reference cycle against the new cell's actual discharge curve before high-current charging is applied.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the Lumia 435 reports wrong battery percentage after a cell swap\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe Lumia 435 uses a coulomb-counting fuel gauge IC that builds its state-of-charge model from the original cell's discharge history. When a new cell goes in, the IC is still running calculations against the old cell's degraded curve. The percentage shown on screen reflects that stale model, not the actual charge in the new cell. One full discharge-to-shutdown followed by an uninterrupted charge to 100% resets the reference curve and brings percentage readings back in line.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSudden shutdown at 20–30% remaining on the new cell\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens when the modem radio or display triggers a brief high-current draw and the cell voltage drops below the BMS low-voltage cutoff threshold — even though the fuel gauge still shows charge remaining. On a freshly installed, uncalibrated cell, the fuel gauge IC has not yet mapped where the voltage cliff actually sits. The BMS cuts power to protect the cell before the displayed percentage reaches zero. Run the calibration cycle described above; after one full reference cycle, the fuel gauge correctly anticipates the voltage drop and low-battery warnings fire before the cutoff triggers.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43404138315866,"sku":"BWCS-NK435SL-1","price":23.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43404138348634,"sku":"BWCS-NK435SL-2","price":26.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43404138381402,"sku":"BWCS-NK435SL-3","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-NK435SL-1.webp?v=1779369060","url":"https:\/\/batteryweb.com\/products\/nokia-lumia-435-replacement-battery-37v-1300mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}