{"product_id":"norstar-t7406-replacement-battery-36v-2000mah-ni-mh","title":"Norstar T7406 Cordless Phone Replacement Battery 3.6V 2000mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eNorstar T7406 — 3.6V Ni-MH Replacement Battery (NTAB9682)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.6V, 2000mAh Ni-MH rechargeable battery for the Norstar T7406 cordless phone handset. It replaces OEM part NTAB9682 and fits the T7406 directly. When the original pack can no longer hold a charge through a full call, this is the correct replacement.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eT7406 handset compatibility:\u003c\/strong\u003e\n    The T7406 uses a 3.6V three-cell Ni-MH pack with a specific contact layout and form factor. This battery matches that voltage rail and physical footprint, so the handset closes correctly and the base cradle makes clean contact with the charging pins.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through the T7406 base station and confirmed the BMS accepted the charge without triggering an error state. Charge current ramped normally and the handset reported full charge status at the expected point in the cycle.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-charge protocol for Ni-MH cordless packs:\u003c\/strong\u003e\n    After installing the battery, place the handset in the base and leave it for a full 16 hours before first use. Ni-MH cells in cordless phones are shipped in a partial state and require a slow initial charge to reach their rated 2000mAh capacity — skipping this step will result in noticeably shorter talk time from day one.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eTalk time shorter than expected after fitting a new pack\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNi-MH cells do not deliver full rated capacity on the first charge cycle — this is normal chemistry behaviour, not a fault with the battery. The T7406 handset draws consistent current during calls, so any capacity shortfall shows up quickly as reduced talk time. Capacity builds over the first three to five full charge-discharge cycles as the cells condition. Run the handset until the low-battery indicator appears, then return it to the base for a full charge — repeat this process and talk time will increase with each cycle.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBase station showing no charge or a fault light after battery swap\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eReplacement Ni-MH packs arrive from storage with a lower resting voltage than a battery just pulled from service. Some T7406 base stations check the pack voltage on contact and will not initiate a charge cycle if the reading falls below their acceptance threshold. Remove the handset, wait 10 seconds, then reseat it firmly so all three charging contacts are fully engaged. If the fault light clears and charging begins, the base has accepted the pack — a voltage reading below approximately 3.0V at rest is usually what triggers the initial rejection.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43339876794458,"sku":"BWCS-NTL746CL-1","price":36.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43339876827226,"sku":"BWCS-NTL746CL-2","price":42.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43339876859994,"sku":"BWCS-NTL746CL-3","price":46.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-NTL746CL-1.webp?v=1778366873","url":"https:\/\/batteryweb.com\/products\/norstar-t7406-replacement-battery-36v-2000mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}