{"product_id":"nortel-nttq4021e6-replacement-battery-37v-1800mah-li-ion","title":"Nortel NTTQ4021E6 Replacement Battery 3.7V 1800mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eNortel NTTQ4021E6 \/ NTTQ4044E6 — 3.7V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.7V, 1800mAh Li-ion replacement battery for the Nortel NTTQ4021E6 and NTTQ4044E6 cordless handsets. It restores power to handsets where the original cell has degraded and no longer holds a charge. Voltage and connector match the original cell — no modification needed.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eNTTQ4021E6 and NTTQ4044E6 compatibility:\u003c\/strong\u003e\n    Both models run off the same 3.7V Li-ion cell with identical connector pinout and BMS handshake. One battery covers both handsets in mixed Nortel deployments.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through charge and discharge on the NTTQ platform. The BMS accepted charge from the Nortel base station without error and held voltage within spec across full discharge.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst charge on a Nortel DECT handset:\u003c\/strong\u003e\n    After installing, seat the handset in the base and leave it for a full charge cycle before first use. Li-ion cells shipped in storage-state benefit from a complete initial charge to reach rated capacity — pulling the handset off early will give you a false low baseline.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eTalk time shorter than the original battery after replacement\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eA new Li-ion cell is shipped at partial charge — typically 30–50% — to slow chemical aging during storage. When you install it and run the handset immediately, the available capacity is lower than rated. Full rated capacity at 1800mAh is only accessible after the cell completes at least one full charge cycle on the base. If talk time still seems short after two or three full cycles, check that the base station contacts are clean and making firm contact with the handset.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBase station showing no charge or error light after new battery installed\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNortel base stations check incoming voltage before starting a charge cycle. A cell that has dropped below roughly 2.5V during storage may read as a fault rather than a dischargeable battery. If the base shows an error light, remove the handset, wait 30 seconds, and re-seat it firmly — this resets the base's charge detection logic. If the error persists, use a compatible external Li-ion charger to bring the cell up to 3.0V, then return it to the base to complete the charge normally.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43339935154266,"sku":"BWCS-BPL100CL-1","price":26.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43339935187034,"sku":"BWCS-BPL100CL-2","price":30.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43339935219802,"sku":"BWCS-BPL100CL-3","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-BPL100CL-1.webp?v=1778366983","url":"https:\/\/batteryweb.com\/products\/nortel-nttq4021e6-replacement-battery-37v-1800mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}