{"product_id":"northwestern-bell-3100-replacement-battery-36v-600mah-ni-mh","title":"NorthWestern Bell 3100 Cordless Phone Replacement Battery 3.6V","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eNorthWestern Bell 3100 — 3.6V Ni-MH Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.6V, 600mAh Ni-MH rechargeable battery for the NorthWestern Bell 3100 cordless phone handset. It matches the original pack's voltage and form factor, fitting the handset battery compartment directly. The Ni-MH chemistry is the same type the 3100 base station expects for charging.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eNorthWestern Bell 3100 handset fit:\u003c\/strong\u003e\n    The 3100 runs a 3.6V three-cell Ni-MH pack — a common rail for this generation of cordless handsets. The base station charge circuit is tuned to Ni-MH termination voltage, so swapping in a matched pack keeps the charge cycle normal.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through charge and discharge on a Ni-MH compatible tester. The cells reached rated capacity by cycle three, and the pack held charge termination without interruption across all test cycles.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-charge protocol for Ni-MH cordless packs:\u003c\/strong\u003e\n    After installing this battery, seat the handset in the base and leave it for a full 16 hours before first use. Ni-MH cells shipped from storage are partially discharged — a slow, uninterrupted first charge lets them reach rated capacity and sets the baseline for subsequent cycles.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBase station showing no charge light on a new Ni-MH pack\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eA new Ni-MH pack sitting in storage can drop below 3.0V. Some base stations on the 3100 series use a voltage-sense circuit before enabling the charge current — if the pack is too low, the base reads it as a fault and shows no charge indicator. The fix is to leave the handset seated without removing it. Most base units will trickle a recovery current and begin normal charging once the pack reaches roughly 3.2V. If the charge light does not appear within two hours, reseat the handset firmly to ensure contact pin alignment.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eTalk time noticeably shorter than the original battery after replacement\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThis is expected on a fresh Ni-MH pack and not a defect. Ni-MH cells ship in a partial state and need three to five full charge and discharge cycles before they deliver rated capacity. Each cycle, the cells condition slightly further and talk time increases. Run the handset until the low-battery indicator appears, return it to the base for a full charge, and repeat — by cycle five, the pack should reach close to the rated 600mAh output.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43339959369818,"sku":"BWCS-P403CL-1","price":23.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43339959402586,"sku":"BWCS-P403CL-2","price":26.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43339959435354,"sku":"BWCS-P403CL-3","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-P403CL-1.webp?v=1778367001","url":"https:\/\/batteryweb.com\/products\/northwestern-bell-3100-replacement-battery-36v-600mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}