{"product_id":"ntl-r66-replacement-battery-24v-750mah-ni-mh","title":"NTL R66 Cordless Phone Replacement Battery 2.4V 750mAh Ni-MH","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eNTL R66 \/ R77 \/ R88 — 2.4V Ni-MH Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 2.4V, 750mAh Ni-MH battery replaces the rechargeable cell inside the NTL R66, R77, and R88 cordless phone handsets. It restores talk time and standby performance lost when the original cell degrades. Dimensions are 44.07 × 20.35 × 10.58mm — confirm fit against your existing pack before installing.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eR66, R77, R88 compatibility:\u003c\/strong\u003e\n    All three handsets share the same 2.4V two-cell NiMH pack format and charging circuit. The base station delivers a constant trickle charge matched to this voltage rail, so swapping between models does not require any electrical adjustment.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through charge and discharge on the R66 handset. The base station accepted the battery without error and the BMS held a stable charge curve across repeated cycles.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-charge protocol for NiMH handsets:\u003c\/strong\u003e\n    After installing, seat the handset in the base and leave it for a full 16 hours before first use. NiMH cells in cordless phones arrive partially discharged from storage — skipping this slow initial charge leaves the cells mismatched and talk time falls short of rated capacity from day one.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eTalk time shorter than original battery after replacement\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNiMH cells do not deliver full rated capacity on the first cycle. The R66's charging circuit uses a slow trickle rate, which means the cells need three to five full charge-and-discharge cycles before the chemistry stabilises at 750mAh. If talk time still feels short after five cycles, check that the handset is sitting correctly in the cradle — a slightly cocked handset breaks contact and the cell only partially charges. A fully conditioned pack should hold the handset at 2.4V under normal RF transmit load.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBase station showing no charge or error light after battery swap\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eA new NiMH pack shipped from storage can sit at 1.8V or lower — below the threshold the base station expects before it starts a charge cycle. Some NTL bases interpret this as a fault and flash an error light instead of charging. The fix is to leave the handset seated in the base undisturbed for two to three hours — the trickle circuit will slowly bring the cell voltage up past the acceptance point and normal charging will resume. If the error light persists past three hours, reseat the handset firmly and check the charging contacts on both the handset and base are clean and making full contact.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43340039946330,"sku":"BWCS-ACT015CL-1","price":21.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43340039979098,"sku":"BWCS-ACT015CL-2","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43340040011866,"sku":"BWCS-ACT015CL-3","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-ACT015CL-1.webp?v=1778367023","url":"https:\/\/batteryweb.com\/products\/ntl-r66-replacement-battery-24v-750mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}