{"product_id":"nuvision-nuvision-101-replacement-battery-37v-3750mah-li-polymer","title":"Nuvision 10.1\" Replacement Battery 3.7V 3750mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eNuvision TM1088C — 3.7V Li-Polymer Replacement Battery (1ICP3\/90\/128 1S1P)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.7V, 3750mAh lithium-polymer battery replaces the original cell in the Nuvision 10.1\" tablet, including model TM1088C. It matches the OEM part number 1ICP3\/90\/128 1S1P and fits the physical bay dimensions at 142.32 x 96.82 x 3.48 mm. Use this when the original battery no longer holds a charge, swells, or fails to power the tablet past the boot screen.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTM1088C compatibility:\u003c\/strong\u003e\n    The Nuvision 10.1\" line runs a single-cell 3.7V Li-Polymer architecture with a flat connector routed to the charge IC on the main board. The TM1088C shares this rail and connector pinout, so the same cell services both models without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this battery through charge and discharge on the TM1088C board. The charge IC accepted the cell without fault flags, BMS protection tripped correctly at low-voltage cutoff, and the tablet resumed normal operation through display and Wi-Fi load.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFuel gauge recalibration after swap:\u003c\/strong\u003e\n    After installing this battery, run the tablet down to automatic shutoff — do not force it off. Then charge uninterrupted to 100% without using the device. This lets the fuel gauge IC map its discharge curve to the new cell and corrects the inaccurate percentage readings that appear in the first few cycles after a swap.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the TM1088C shuts down between 15% and 25% remaining\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe Nuvision 10.1\" display backlight and Wi-Fi radio together pull a combined load that causes a sharp voltage sag in a degraded or freshly swapped cell. The charge IC reads this sag as a low-voltage cutoff condition and shuts the tablet down even though the fuel gauge still shows charge remaining. This is not a fault with the new battery — it is a calibration mismatch between the fuel gauge IC and the new cell's actual discharge curve. One full discharge-to-shutoff cycle followed by an uninterrupted charge to 100% corrects the cutoff threshold.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eNuvision tablet stuck in a reboot loop after battery replacement\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eIf the TM1088C reboots repeatedly after a battery swap, the cell voltage is likely below the minimum threshold the bootloader needs to complete POST. Connect the tablet to a charger and leave it for 20–30 minutes before attempting to power on — do not press the power button during this window. The charge IC needs time to bring the new cell up from storage voltage, which typically sits around 3.6–3.7V, to the 3.8V floor the bootloader requires. Once the charge LED changes state or the charging animation appears, the tablet should boot normally.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43426012037210,"sku":"BWCS-NST108SL-1","price":32.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43426012069978,"sku":"BWCS-NST108SL-2","price":37.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43426012102746,"sku":"BWCS-NST108SL-3","price":41.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-NST108SL-1.webp?v=1779930219","url":"https:\/\/batteryweb.com\/products\/nuvision-nuvision-101-replacement-battery-37v-3750mah-li-polymer","provider":"BatteryWeb","version":"1.0","type":"link"}