{"product_id":"olycom-c200-replacement-battery-36v-1200mah-ni-mh","title":"Olycom C200 Cordless Phone Compatible Battery 3.6V 1200mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eOlycom C200 — 3.6V Ni-MH Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.6V, 1200mAh Ni-MH battery replaces the original pack in the Olycom C200 cordless phone handset. It restores full handset operation without buying a new phone. Capacity figure is 4.32Wh as rated.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eC200 handset fit:\u003c\/strong\u003e\n    The C200 runs a standard 3.6V Ni-MH single-cell-equivalent pack. The connector orientation, cell count, and voltage rail all match the original factory spec. No modification needed to seat the pack in the handset compartment.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through charge and discharge on a cordless phone test rig. The BMS accepted charge from the base station normally, with no cutoff or error state triggered during the first three cycles.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst charge on NiMH cordless packs:\u003c\/strong\u003e\n    After installing, seat the handset in the base and leave it for a full 16 hours before first use. Ni-MH cordless batteries arrive partially discharged from storage. A slow initial charge lets the cells reach rated capacity rather than plateauing short of it.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eTalk time shorter than expected after fitting the new battery\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eNi-MH cells do not reach rated capacity on the first charge cycle. The C200 base station charges at a trickle rate, and new cells need three to five full charge-discharge cycles before the chemistry fully activates. Talk time will increase noticeably across those early cycles. Run the handset until it signals low battery, return it to the base for a full 16-hour charge, and repeat — capacity builds each time.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBase station shows no charge indicator after fitting the replacement pack\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eA Ni-MH pack that has sat in storage drops below the voltage threshold some DECT base stations need before they begin charging. If the charge light does not appear within a few minutes of seating the handset, remove the handset, wait 10 seconds, and reseat it firmly. If the issue persists, check the pack voltage with a multimeter — a reading below 3.0V confirms a deep-discharge state. Most base stations will resume charging once the pack is briefly boosted to at least 3.2V using a standalone Ni-MH charger.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43340089753690,"sku":"BWCS-HST319CL-1","price":30.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43340089786458,"sku":"BWCS-HST319CL-2","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43340089819226,"sku":"BWCS-HST319CL-3","price":37.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-HST319CL-1.webp?v=1778367047","url":"https:\/\/batteryweb.com\/products\/olycom-c200-replacement-battery-36v-1200mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}