{"product_id":"olympus-eye-trek-replacement-battery-74v-4400mah-li-ion","title":"Olympus EYE-TREK 7.4V Compatible Battery 4400mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eOlympus EYE-TREK — 7.4V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 7.4V, 4400mAh (32.56Wh) Li-ion cell replaces the original battery in the Olympus EYE-TREK head-mounted personal viewer. The EYE-TREK draws sustained power through its display driver and video decoding circuitry, which places a steady load on the cell. Capacity figures come from the product data, not web estimates.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eEYE-TREK display system load:\u003c\/strong\u003e\n    The EYE-TREK runs a continuous image pipeline — display panels, signal processing, and audio amplification pull from the same cell simultaneously. This 7.4V configuration matches the voltage rail the device expects, so the display driver receives stable input without the BMS stepping in to compensate for a mismatched source.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through full charge and discharge passes, monitoring BMS cutoff behaviour under display-level loads. The protection circuit triggered cleanly at low-voltage threshold without false trips during the sustained draw phase.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-cycle conditioning for the EYE-TREK:\u003c\/strong\u003e\n    Run one complete charge cycle using the original Olympus charger before extended viewing sessions. The EYE-TREK's battery indicator calibrates its remaining-charge display against the cell's full voltage range — skipping this step can cause the indicator to read incorrectly from the first use.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the EYE-TREK battery indicator reads full then drops sharply\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe EYE-TREK maps remaining charge using fixed voltage thresholds tied to the original cell's discharge curve. A new Li-ion cell has a slightly flatter mid-range discharge profile than a worn cell, so the indicator holds at a high reading longer, then steps down quickly as the voltage approaches the lower threshold. This is a firmware mapping issue, not a cell fault. After two or three full charge and discharge cycles, the indicator reading stabilises and tracks more accurately against actual remaining capacity.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eEYE-TREK display flickering or cutting out before the battery reads empty\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe display driver in the EYE-TREK draws a short current spike each time it refreshes or adjusts brightness, particularly during high-contrast scene changes. If the cell's internal resistance is elevated — common in heavily cycled originals — this spike causes a momentary voltage sag that the BMS reads as an undervoltage event and shuts the output. The replacement cell's lower internal resistance prevents the sag from reaching that cutoff threshold. If the symptom occurs on a new cell, check that the battery contacts are seated fully and measure the charged voltage at the terminals — it should read between 8.2V and 8.4V before use.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43333921701978,"sku":"BWCS-F750-1","price":43.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43333921734746,"sku":"BWCS-F750-2","price":50.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43333921767514,"sku":"BWCS-F750-3","price":55.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-F750-1.webp?v=1778213575","url":"https:\/\/batteryweb.com\/products\/olympus-eye-trek-replacement-battery-74v-4400mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}