{"product_id":"olympus-iplex-lxlt-replacement-battery-108v-3400mah-li-ion","title":"Olympus NC2040A22 IPLEX LX\/LT Compatible Battery 10.8V 3400mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eOlympus IPLEX LX\/LT Series — 10.8V Li-ion Replacement Battery (NC2040A22)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 10.8V, 3400mAh Li-ion battery replaces the original pack in Olympus IPLEX LX\/LT and IPLEX MXII portable videoscope systems. It fits the handheld display unit that powers the insertion tube, light source, and on-screen image processing during confined-space inspections. Voltage and cell count match the OEM spec exactly — no adapter or modification required.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eIPLEX LX\/LT and MXII compatibility:\u003c\/strong\u003e\n    These models share a common battery bay, connector pinout, and BMS communication protocol. The display unit handshakes with the pack over a dedicated data line — voltage alone does not satisfy the check. This pack carries the correct cell configuration and communication response to pass that handshake without triggering a battery error on boot.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran the pack through a full power cycle on an IPLEX LT unit, including probe initialisation and sustained tip articulation. The BMS held stable through the current spike at probe power-up — the point where undersized or poorly cloned cells typically trip the protection circuit and cut output.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst deployment after storage:\u003c\/strong\u003e\n    After installing a new pack, run a full calibration cycle through the instrument's system menu before taking it into the field. The IPLEX maps battery state during calibration — skipping this step causes the low-battery indicator to fire prematurely on the first inspection session, even with a full charge.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBMS cutoff at probe insertion tube initialisation\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eWhen the IPLEX powers on the insertion tube, the tip motor, LEDs, and image sensor all draw current simultaneously. This surge can spike 2–3A above the steady-state draw for roughly half a second. A pack with degraded cells or a conservative protection IC will read that spike as an overcurrent event and cut output immediately — the screen goes black and the unit reboots. This battery uses cells rated for the peak pulse current the IPLEX requires at probe wake-up, so the BMS does not misread initialisation as a fault condition.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003ePack will not charge after sitting unused in carry case for months\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLi-ion cells that self-discharge below approximately 2.5V per cell enter a deep-discharge state where most chargers refuse to begin a charge cycle — the BMS presents too low a voltage for the charger's detection threshold. The IPLEX OEM charger has a recovery mode, but it activates only if the pack voltage is still above the charger's minimum detection floor, typically around 8V for a 3S pack. If the charger shows no activity, connect the pack and leave it on charge for 20–30 minutes without interruption — some chargers need a brief trickle period to wake the BMS before switching to full charge. If the charge LED still does not activate after that window, check cell voltage directly; anything below 7.5V across the pack requires a dedicated lithium recovery charger set to 10.8V nominal before returning to the OEM charger.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43360453918810,"sku":"BWCS-FBP290SL-1","price":403.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43360453951578,"sku":"BWCS-FBP290SL-2","price":483.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43360453984346,"sku":"BWCS-FBP290SL-3","price":542.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-FBP290SL-1.webp?v=1778614684","url":"https:\/\/batteryweb.com\/products\/olympus-iplex-lxlt-replacement-battery-108v-3400mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}