{"product_id":"olympus-t-100-replacement-battery-37v-600mah-li-ion","title":"Olympus Li-80B Replacement Battery 3.7V 600mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eOlympus T-100 \/ X-960 — 3.7V Li-ion Replacement Battery (Li-80B)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.7V, 600mAh Li-ion cell replaces the OEM Li-80B battery in the Olympus T-100 and X-960 compact digital cameras. It powers the imaging sensor, display, and onboard electronics through photo and video capture sessions. Capacity matches the original spec — no modification to the camera body or charger is needed.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eT-100 and X-960 compatibility:\u003c\/strong\u003e\n    Both models run the same Li-80B cell format — identical footprint at 43.70 × 31.30 × 7.00mm, same 3.7V nominal voltage rail, and the same BMS handshake. One cell covers both bodies without any adapter or wiring change.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through charge and discharge on the T-100 body. The BMS accepted the cell, the battery indicator populated correctly after one full charge cycle via the camera body, and protection circuitry triggered at the correct low-voltage cutoff.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-use charge cycle on the T-100:\u003c\/strong\u003e\n    Run the first full charge from within the camera body using your OEM charger or USB port, not an external third-party charger. The T-100's BMS uses that initial charge cycle to map the cell's discharge curve — skipping it can cause the remaining-shots counter to read inaccurately from the start.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the T-100 battery indicator jumps or reads zero on a fresh cell\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe T-100 maps remaining charge by comparing real-time voltage against a stored discharge curve calibrated to the original cell. A new replacement cell has a slightly different discharge curve shape, so voltage readings at mid-charge don't always land on the expected thresholds. The camera interprets the mismatch as a sudden drop or empty state. Running one complete charge-to-full, shoot-to-low cycle lets the BMS recalibrate and display accurate readings going forward.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCamera showing \"no battery\" or refusing to power on with a new Li-80B cell installed\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens when the replacement cell ships at a low storage voltage — typically below 3.0V — and the camera's BMS won't initialise a cell it reads as critically flat. Remove the cell and place it in an OEM Olympus charger for 15–20 minutes to bring it up to approximately 3.2V. Reinsert and power on. If the camera still won't boot, check the cell contacts on both the battery and the compartment terminals for oxidation and clean with a dry cloth.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43333835063386,"sku":"BWCS-NP900-1","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43333835096154,"sku":"BWCS-NP900-2","price":25.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43333835128922,"sku":"BWCS-NP900-3","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-NP900-1.webp?v=1778213259","url":"https:\/\/batteryweb.com\/products\/olympus-t-100-replacement-battery-37v-600mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}