{"product_id":"oppo-r7-replacement-battery-38v-2300mah-li-polymer","title":"BLP595 Oppo R7 Replacement Battery 3.8V 2300mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eOppo R7 Series — 3.8V Li-Polymer Replacement Battery (BLP595)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.8V, 2300mAh Li-Polymer cell for the Oppo R7, R7T, R7C, and R7 Lite Dual SIM. It replaces the original BLP595 when the existing cell has degraded or failed. Fits the full R7 lineup that shares this battery footprint and connector spec.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eR7 series compatibility:\u003c\/strong\u003e\n    The R7, R7T, R7C, and R7 Lite Dual SIM all run the same 3.8V power rail with an identical connector and BMS handshake. One cell covers the entire group without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through charge and discharge on an R7 unit. The BMS accepted the charge IC handshake cleanly, and protection circuits responded correctly to both low-voltage cutoff and overcurrent conditions.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFuel gauge recalibration on first cycle:\u003c\/strong\u003e\n    After fitting this cell, disable fast charging and run one full discharge down to auto-off, then charge to 100% on standard current. This gives the coulomb counter a clean reference curve before fast-charge current is applied to an uncalibrated cell.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the R7 reports wrong battery percentage after a cell swap\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe R7 uses a fuel gauge IC that tracks charge state by measuring cumulative current flow against a stored discharge curve. That curve was built around the original cell's impedance profile. A new BLP595 cell has a different impedance — often lower — so the IC misreads remaining capacity until it recalibrates. The fix is one full discharge-charge cycle with fast charging disabled. After that cycle, the gauge rewrites its reference and percentage readings stabilise.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSudden shutdown at 20–25% on the replacement cell\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a voltage cliff issue, not a capacity problem. Under modem transmission or screen-on load, the cell voltage drops sharply near the bottom of its curve — faster than the fuel gauge expects. The phone's under-voltage protection trips before the displayed percentage reaches zero. Run two full discharge cycles from 100% down to auto-shutdown to let the gauge map the new cell's voltage curve accurately. After calibration, the shutdown threshold should align with a reported level below 5%.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43404160893018,"sku":"BWCS-OPR700SL-1","price":26.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43404160925786,"sku":"BWCS-OPR700SL-2","price":30.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43404160958554,"sku":"BWCS-OPR700SL-3","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-OPR700SL-1.webp?v=1779369269","url":"https:\/\/batteryweb.com\/products\/oppo-r7-replacement-battery-38v-2300mah-li-polymer","provider":"BatteryWeb","version":"1.0","type":"link"}