{"product_id":"oppo-realme-x50-pro-5g-replacement-battery-77v-2050mah-li-polymer","title":"Oppo Realme X50 Pro 5G BLP777 Replacement Battery 7.7V 2050mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eOppo Realme X50 Pro 5G — 7.7V Li-Polymer Replacement Battery (BLP777)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 7.7V, 2050mAh Li-Polymer battery replaces the OEM BLP777 cell in the Realme X50 Pro 5G (RMX2072). It restores power capacity to devices where the original cell has degraded, swollen, or failed. Voltage and chemistry match the stock specification so the charge IC and BMS can communicate correctly with the new cell.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRMX2072 platform fit:\u003c\/strong\u003e\n    The X50 Pro 5G uses a dual-cell Li-Polymer stack managed by a single BMS. The BLP777 footprint — 73.60 × 61.90 × 5.90mm — and the 7.7V nominal voltage are specific to this board layout. Any deviation in cell thickness or voltage triggers a BMS reject during initialisation.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through charge and discharge on the RMX2072 board. The BMS accepted the new cell without error flags on the first connection. Charge IC handshake completed normally and the protection circuit responded correctly to end-of-charge cutoff.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFuel gauge recalibration on first use:\u003c\/strong\u003e\n    After fitting this cell, disable VOOC fast charging for one full discharge and recharge cycle. The fuel gauge IC on the X50 Pro 5G is calibrated to the coulomb curve of the original cell. Running one slow cycle lets the IC reset its reference points before high-current charging begins.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSudden shutdown at 20–30% on the Realme X50 Pro 5G after a cell swap\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens because the fuel gauge IC still uses the old cell's voltage-to-capacity curve. The new cell hits a voltage cliff under 5G modem or display load at a state of charge the IC misreads as safe. The phone's low-voltage cutoff trips before the reported percentage reaches zero. One complete slow discharge-charge cycle forces the coulomb counter to rebuild its reference map against the new cell's actual discharge curve.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eVOOC fast charge not activating on the first cycle after replacement\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eOn the first charge after a cell swap, the charge IC runs a compatibility check against the new BMS. If the handshake does not complete within the expected window, the IC falls back to standard 5W charging as a protection measure. This is not a fault — it clears after the first full charge cycle at standard rate. On the second charge, reconnect the VOOC adapter and the protocol negotiation completes correctly at the full rated current.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43391901630554,"sku":"BWCS-OPX510SL-1","price":32.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43391901663322,"sku":"BWCS-OPX510SL-2","price":37.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43391901696090,"sku":"BWCS-OPX510SL-3","price":41.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-OPX510SL-1.webp?v=1779142626","url":"https:\/\/batteryweb.com\/products\/oppo-realme-x50-pro-5g-replacement-battery-77v-2050mah-li-polymer","provider":"BatteryWeb","version":"1.0","type":"link"}