{"product_id":"opticon-h-32-replacement-battery-37v-1800mah-li-ion","title":"Opticon H-32 Replacement Battery 3.7V 1800mAh 13224","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eOpticon H-32 \/ H-32A Series — 3.7V Li-ion Replacement Battery (13224)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.7V 1800mAh Li-ion battery replaces part number 13224 in the Opticon H-32, H-32A, H32, and H32A handheld barcode scanners. These mobile data terminals are used in retail point-of-sale, warehousing, and inventory pick-and-pack operations. Dimensions are 53.19 × 35.67 × 11.43mm — check your original pack before ordering if your unit has been serviced before.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eH-32 and H-32A compatibility:\u003c\/strong\u003e\n    Both the H-32 and H-32A variants share the same battery bay dimensions, connector pinout, and BMS handshake protocol. The 13224 part number covers both. No adapter or firmware change is needed.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack through charge and discharge cycles on the H-32 platform. The BMS communicated correctly with the host device, accepted cradle charging without error flags, and held voltage within spec across repeated scan-trigger inrush events.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-shift preparation:\u003c\/strong\u003e\n    After installing, seat the scanner in its charging cradle and run a full charge cycle before using it on a pick-and-pack shift. Scan trigger inrush current is highest when the cell is near minimum charge — a pre-charged pack prevents false BMS cutoffs during your first burst of scans.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCradle charging error on a new pack — what triggers it\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe H-32 cradle checks contact resistance before initiating a charge cycle. If the gold contacts on the battery or dock have oxidation or residue from handling, resistance reads high and the cradle throws a charge error rather than start. This is not a faulty battery. Wipe the battery contacts and cradle pins with a dry cloth, reseat the unit firmly, and the error clears. If it persists, confirm cradle output voltage is 4.2V at the contact pins.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eScanner drops wireless connection during rapid scan bursts\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eDuring a fast scan burst, the H-32 draws current simultaneously from the imager, the processor, and the wireless radio. If the battery voltage sags below the radio module's minimum rail voltage, the wireless link drops before the scanner powers off. This is distinct from a dead battery — the unit stays on but loses its connection to the host. A battery with degraded cells triggers this at higher states of charge than a fresh pack. If the previous battery held connection and this one does not, verify the replacement pack is fully charged before diagnosing further — voltage at rest should read 4.1V or above.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43324935045210,"sku":"BWCS-UPA600BL-1","price":25.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43324935077978,"sku":"BWCS-UPA600BL-2","price":28.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43324935110746,"sku":"BWCS-UPA600BL-3","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-UPA600BL-1.webp?v=1778123453","url":"https:\/\/batteryweb.com\/products\/opticon-h-32-replacement-battery-37v-1800mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}