{"product_id":"opticon-h13-replacement-battery-37v-1100mah-li-ion","title":"Opticon H13 Barcode Scanner Replacement Battery 3.7V 1100mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eOpticon H13 \/ OPH-1003 Series — 3.7V Li-ion Replacement Battery (BTR0100)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.7V Li-ion replacement battery rated at 1100mAh (4.07Wh) for the Opticon H13, H-13, OPH-1003, and OPH-1004 handheld barcode scanners. It matches the OEM BTR0100 specification and fits the same battery bay without modification. If your scanner is shutting down mid-shift or won't hold a charge, this pack replaces the original cell.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eH13 and OPH-100x compatibility:\u003c\/strong\u003e\n    These models share the same 3.7V single-cell architecture, connector pinout, and BMS handshake protocol — one battery covers the full group. The cell form factor is identical across H13, H-13, OPH-1003, and OPH-1004 variants.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through repeated scan-burst and wireless polling loads on an H13 unit. The BMS held steady across the discharge curve and did not trip during combined radio and laser inrush events.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-shift preparation:\u003c\/strong\u003e\n    After installing, seat the scanner in its cradle for a full charge cycle before use. Scan trigger inrush current peaks when the cell is near minimum — a fully charged cell prevents false BMS trips during the first pick-and-pack shift.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCradle showing charging error on a new pack\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eA charging error on a new battery almost always comes down to contact resistance between the battery terminals and the cradle's charge pins, not a fault in the cell itself. Oxidation, dust, or a light film on either surface is enough to confuse the dock's charge detection circuit. Wipe the gold contacts on the battery and the cradle pins with a dry lint-free cloth, then reseat the scanner firmly. If the error clears, run a full charge cycle before deploying the unit.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eScanner not reading barcodes immediately after a battery swap\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe H13's laser or imager module requires a stable voltage rail to fire at rated power — if the replacement cell ships partially discharged, the scanner may power on but produce weak or failed reads. This is not a scanner fault; it is the cell voltage sitting below the threshold the scan engine needs for a clean read. Place the scanner in the cradle straight after installing the new pack and charge it to full before your first scan attempt. Once the cell reaches 4.1–4.2V, scan performance returns to spec.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43324894249050,"sku":"BWCS-OPH130BL-1","price":23.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43324894281818,"sku":"BWCS-OPH130BL-2","price":26.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43324894314586,"sku":"BWCS-OPH130BL-3","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-OPH130BL-1.webp?v=1778123335","url":"https:\/\/batteryweb.com\/products\/opticon-h13-replacement-battery-37v-1100mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}