{"product_id":"opticon-opl-9700-replacement-battery-37v-800mah-li-ion","title":"Opticon OPL-9700 Replacement Battery 3.7V 800mAh Li-ion","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eOpticon OPL-9700 Series — 3.7V Li-ion Replacement Battery (02-BATLION-03)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.7V 800mAh Li-ion cell replaces the factory battery in the Opticon OPL-9700 handheld barcode scanner. It also fits the OPL-9712, OPL-9723, and OPL-9724 across the same scanner family. Capacity is 800mAh (2.96Wh) — matched to the original specification.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eOPL-9700 series compatibility:\u003c\/strong\u003e\n    The OPL-9700, OPL-9712, OPL-9723, and OPL-9724 share the same battery bay geometry, connector pinout, and BMS handshake protocol. One cell fits all four without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through scan trigger bursts and wireless polling loads on the OPL-9700 platform. The BMS held correct cutoff thresholds at both the low-voltage floor and charge termination point across repeated cycles.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-shift preparation:\u003c\/strong\u003e\n    After installing, seat the scanner in its cradle for a full charge cycle before use. Scan trigger inrush current peaks when the cell is near minimum — a fully charged pack prevents false BMS trips during the first high-frequency scan burst of the shift.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCradle charging error on a new pack\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe OPL-9700 cradle reads contact resistance before initiating a charge cycle. If the dock contacts on the scanner or cradle have oxidation or debris, the cradle flags a charging error even with a brand-new cell installed. Remove the scanner, wipe the gold contacts on the battery face and cradle dock with a dry cloth, then reseat firmly. The error clears once contact resistance drops below the cradle's threshold — typically confirmed by the charge LED switching from red to amber within 10 seconds of reseating.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eScanner losing wireless connection during rapid scan bursts\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eOn the OPL-9700, the wireless radio and scan trigger draw current simultaneously during a rapid scan sequence. If the cell voltage sags below 3.4V under combined load, the radio stack resets to protect the processor — which the host system reads as a dropped connection. This is not a radio fault. Charge the pack to full before a high-throughput shift and check that the cradle contact is clean so charge termination completes correctly at 4.2V.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43324883468378,"sku":"BWCS-OPH971BL-1","price":25.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43324883501146,"sku":"BWCS-OPH971BL-2","price":28.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43324883533914,"sku":"BWCS-OPH971BL-3","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-OPH971BL-1.webp?v=1778123334","url":"https:\/\/batteryweb.com\/products\/opticon-opl-9700-replacement-battery-37v-800mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}